[Openswan Users] VPN tunnel established but could nottransferdata for one roadwarrior setup and could transfer data foranotherroadwarrior setup

[Mohamed Mydeen.A]

Hi Alex,

Now I am able to ping after enabling NAT-T.  Thank You So Much Alex...

Thanks & Regards,

Mohamed Mydeen A
Engineer - DSP Software
Jasmin Infotech Private Limited
Plot No. 119, Velacherry Tambaram Road,
Opposite to NIOT
Pallikkaranai
Chennai 
India - 600 100.
Tel. : +91-44-3061 9600
Mail: mohamedmydeen.a at jasmin-infotech.com
##################################Disclaimer#############################
Information contained in this E-MAIL being proprietary to Jasmin Infotech
Pvt. Ltd.
is 'privileged' and 'confidential' and intended for use only by the
individual or entity 
to which it is addressed. You are notified that any use, copying or
dissemination of
the information contained in the E-MAIL in any manner whatsoever is strictly
prohibited.
########################################################################


-----Original Message-----
From: Alex Crow [mailto:acrow at integrafin.co.uk] 
Sent: Monday, April 07, 2008 2:14 PM
To: Mohamed Mydeen.A
Cc: users at openswan.org
Subject: RE: [Openswan Users] VPN tunnel established but could
nottransferdata for one roadwarrior setup and could transfer data
foranotherroadwarrior setup


On Mon, 2008-04-07 at 13:55 +0530, Mohamed Mydeen.A wrote:
> Hi Alex,
> 
> Thank you very much for your soon reply.  I have not enabled NAT-T in
> ipsec.conf.  Will it be the problem for my case ? 
> 
> I will enable it and then I will let you know the result.
> 
> Regards,
> 
> Mohamed Mydeen A
> 

Almost certainly that is the problem. The firewall at the other end
should also be capable of NAT-T support.

Cheers

Alex