[Openswan Users] What is the problem?

[Magnus Holmberg]

It seems like my vpn connection have stopped working. Can someone tell 
me what the problem seems to be?
I cant think of anything changed in my end since it worked last time.

My log:

Mar 28 13:58:14 fw pluto[16617]: "MyConnection" #2: transition from 
state STATE_MAIN_I1 to state STATE_MAIN_I2
Mar 28 13:58:14 fw pluto[16617]: "MyConnection" #2: STATE_MAIN_I2: sent 
MI2, expecting MR2
Mar 28 13:58:14 fw pluto[16617]: "MyConnection" #2: ignoring unknown 
Vendor ID payload [8f770f35da2b083ce66f4cb98ff43f5a]
Mar 28 13:58:14 fw pluto[16617]: "MyConnection" #2: I did not send a 
certificate because I do not have one.
Mar 28 13:58:14 fw pluto[16617]: "MyConnection" #2: transition from 
state STATE_MAIN_I2 to state STATE_MAIN_I3
Mar 28 13:58:14 fw pluto[16617]: "MyConnection" #2: STATE_MAIN_I3: sent 
MI3, expecting MR3
Mar 28 13:58:14 fw pluto[16617]: "MyConnection" #2: next payload type of 
ISAKMP Hash Payload has an unknown value: 24
Mar 28 13:58:14 fw pluto[16617]: "MyConnection" #2: malformed payload in 
packet
Mar 28 13:58:14 fw pluto[16617]: | payload malformed after IV
Mar 28 13:58:14 fw pluto[16617]: |   85 b6 cb 12  ab 66 3b 53
Mar 28 13:58:14 fw pluto[16617]: "MyConnection" #2: sending notification 
PAYLOAD_MALFORMED to X.X.192.141:500
Mar 28 13:58:14 fw pluto[16617]: "MyConnection" #2: Main mode peer ID is 
ID_IPV4_ADDR: 'X.X.192.141'
Mar 28 13:58:14 fw pluto[16617]: "MyConnection" #2: transition from 
state STATE_MAIN_I3 to state STATE_MAIN_I4
Mar 28 13:58:14 fw pluto[16617]: "MyConnection" #2: STATE_MAIN_I4: 
ISAKMP SA established {auth=OAKLEY_PRESHARED_KEY 
cipher=oakley_3des_cbc_192 prf=oakley_sha group=modp1024}
Mar 28 13:58:14 fw pluto[16617]: "MyConnection" #2: Dead Peer Detection 
(RFC 3706): not enabled because peer did not advertise it
Mar 28 13:58:14 fw pluto[16617]: "MyConnection" #4: initiating Quick 
Mode PSK+ENCRYPT+TUNNEL+PFS+UP {using isakmp#2}
Mar 28 13:58:14 fw pluto[16617]: "MyConnection" #2: ignoring 
informational payload, type NO_PROPOSAL_CHOSEN
Mar 28 13:58:14 fw pluto[16617]: "MyConnection" #2: received and ignored 
informational message



And config:

config setup
        interfaces="ipsec0=eth0"
        syslog=auth.debug
        # Debug-logging controls:  "none" for (almost) none, "all" for lots.
        klipsdebug=all
        plutodebug=none


# Add connections here.

conn MyConnection
        authby=secret
        #auto=start
        auto=start
        dpddelay=3
        dpdtimeout=120
        dpdaction=restart
        rekey =yes
        #keyingtries=3
        keylife=30m
        ikelifetime=30m
        left=X.X.44.166
        leftnexthop=%direct
        leftsubnet=X.X.46.204/32
        pfs=yes
        right=X.X.192.141
        rightid=X.X.192.141
        rightnexthop=%direct
        rightsubnet=X.X.192.68/32