[Openswan Users] Tunnel headends

[Andy Gay]

On Fri, 2007-03-23 at 17:40 +0200, Andrei-Florian Staicu wrote:
> Andy Gay wrote:
> > On Fri, 2007-03-23 at 15:13 +0200, Andrei-Florian Staicu wrote:
> >   
> >> 192.168.3.0/24===<extipA>[@srvA]...<extipB>[@srvB]===192.168.4.0/24
> >>     
> >
> > Yes, use <left/right>sourceip.
> >
> > Assuming your conns are written with left/right as you show above,
> > use leftsourceip=192.168.3.1 on srvA, rightsourceip=192.168.4.1 on srvB.
> >
> > E.g. if the conn on srvA has leftsubnet=192.168.3.1/24, then add
> > leftsourceip=192.168.3.1. Similarly on srvB, if it has
> > rightsubnet=192.168.4.0/24, then add rightsourceip=192.168.4.1
> It works like a charm, thank you very much.
> I would like to ask you something else (and this is the last one), 
> though: what happens if behind srvB i have another subnet, let's say 
> 10.0.0.0/24, with 10.0.0.1 on srvB and i want to access it from location 
> A? Can i route it through the tunnel? Or what steps should i take?

Add another tunnel. Most parameters will be the same as your existing
conn, just change rightsubnet=192.168.4.0/24 to rightsubnet=10.0.0.0/24.

BTW - please copy the mailing list with these questions.

> 
> Thanks
> 
> -- 
> Andrei-Florian STAICU
> Network administrator
> Tel: (+40) 741.227.014
> IPSO S.A.
> 
> 
>