[Openswan Users] NATing tunnel traffic?

[Paul Overton]

If you are using KLIPS then you can use iptables to SNAT your outgoing
traffic through your ipsec tunnel.

I believe it is possible with NETKEY, but I have not tried that. 


Regards Paul
--


 
-----Original Message-----
From: users-bounces at openswan.org [mailto:users-bounces at openswan.org] On
Behalf Of Steve Goodrich
Sent: 23 June 2007 03:42
To: users at openswan.org
Subject: [Openswan Users] NATing tunnel traffic?

I am running openswan on openSUSE 10.2. It's a 2.6 kernel. I need to NAT
all my traffic running over an IPSec tunnel so that it looks like it is
coming from a specific private address. It isn't the address of our
network. It is one a vendor provided. 

Is there any way to do this or am I going to have to spring for a Cisco?


Steve Goodrich
Longbody Computer Services, Inc.
Riverton, Utah
www.longbodycs.com
_______________________________________________
Users at openswan.org
http://lists.openswan.org/mailman/listinfo/users
Building and Integrating Virtual Private Networks with Openswan: 
http://www.amazon.com/gp/product/1904811256/104-3099591-2946327?n=283155

--
This message has been scanned for viruses and dangerous content by
MailScanner, and is believed to be clean.


-- 
This message has been scanned for viruses and
dangerous content by Trusted Management Limited, and is
believed to be clean.