[Openswan Users] Manual Tunnel

[Utkarsh Shah]

Hi

conn manual-1
       

conn ManualConn
        type=tunnel
        left=XX.XX.XX.XX (Server's IP Address/domain name)
        leftnexthop=XX.XX.XX.XX (Gateway Address optional)
        right=XX.XX.XX.XX (Remote Server)
        leftsubnet=XX.XX.XX.XX/XX (local private network)
        rightsubnet=XX.XX.XX.XX/XX (remote private network)
        spi=0x100
        leftespspi=0x100
        rightespspi=0x100
        esp=3des-md5
        
leftespenckey=0x111111111111111111111111111111111111111111111111(any hex 
characters)
        
rightespenckey=0x111111111111111111111111111111111111111111111111(any 
hex characters)
        leftespauthkey=0x11111111111111111111111111111111(any hex 
characters)
        rightespauthkey=0x11111111111111111111111111111111(any hex 
characters)

same type of configuration at remote end also...

after that invoke command
/usr/sbin/ipsec manual --up ManualConn
at both end

Regards,
Utkarsh Shah
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Mon, 2 Jul 2007 02:27:53 -0700 (PDT)
> From: kian <kian54iran at yahoo.com>
> Subject: [Openswan Users] Manual Tunnel
> To: users at openswan.org
> Message-ID: <311937.66793.qm at web31913.mail.mud.yahoo.com>
> Content-Type: text/plain; charset=iso-8859-1
>
> Hi,
> Please help to me, configure manua tunnel for
> freeswan.
> Thanks.
>
>
>        
> ____________________________________________________________________________________
>
>