[Openswan Users] trying to configure XAUTH as replacement for working Cisco VPN Client

[Marcus Carlson]

David,

Did you try on a standard (i386) linux and had it connected? I've tried 
this for over a year, but haven't got it to work, it would feel more 
encouraging if someone else had done it

I've tried the Cisco client but would like to use the "real" stuff ;-)

Marcus

David Lawless skrev:
> Marcus
> 
> The fellow who had built 2.4.8rc1 for 'openwrt' has not offered 
> to share his code, and I don't have time to dedicated to the
> cross-compile and integration effort, especially as the Cisco VPN 
> Client works fine.  So haven't tried it.  Guess we have to 
> wait for the next version of 'openwrt', which could be many 
> months out.  Apparently a Linux version of the Cisco client 
> exists, and I many try to obtain a copy of that.
> 
> David
> 
> 
> 
> At 11:36 AM 4/5/2007 +0200, Marcus Carlson wrote:
>> Hi,
>>
>> Did you successfully connect to cisco using groupname using 2.4.8rc1? 
>> And what config settings did you use? I've tried the same as you wrote 
>> but received different errors.
>>
>> Regards,
>> Marcus
>>
>> David Lawless wrote:
>>> Hello,
>>>
>>>
>>> Here's the config.  I've been using the commented lines in the
>>> second case above.
>>>
>>> version 2.0
>>> config setup
>>>         interfaces=%defaultroute
>>>         nat_traversal=yes
>>>         klipsdebug=none
>>>         plutodebug=none
>>>
>>> conn Connection
>>>         left=             %defaultroute
>>>         leftid=           @GroupName
>>>         leftxauthclient=  yes
>>>         right=            R.R.R.R
>>>         rightsubnet=      R.R.R.H/32
>>>         rightxauthserver= yes
>>>        #aggrmode=         yes
>>>        #ike=              aes128
>>>        #esp=              3des-sha1-96
>>>         authby=           secret
>>>         xauth=            yes
>>>         auto=             add
>>>
>>>
>