[Openswan Users] Problem with multiple road-warriors and psk

[Andy Van den Heede]

Hello, Paul,

I did also a test with two different leftid's. Also in main mode....

But when the linksys1 tries to build up the tunnel, the openswan tries
to bring up the tunnel 2.

I use aggressive mode because it will be dynamic ip addresses at the
external side of the Linksys routers. The setup now is a test network.

Andy
 

-----Oorspronkelijk bericht-----
Van: Paul Wouters [mailto:paul at xelerance.com] 
Verzonden: woensdag 20 september 2006 18:48
Aan: Andy Van den Heede
CC: users at openswan.org
Onderwerp: Re: [Openswan Users] Problem with multiple road-warriors and
psk

On Wed, 20 Sep 2006, Andy Van den Heede wrote:

> I have some problems with muliptle road-warriors connections with an
> openswan server and two linksys routers (different subnet). I made 2
> different ipsec connections in ipsec.conf and also 2 lines in
> ipsec.secrets.
>
> I work with different rightid fields and different connection names.
The
> mode is use is aggressive mode. See below more information. Whe I just
> configure 1 connection, there is no problem and is the ipsec
connection
> working perfect.

Try without using aggressive mode. Why are you using aggressive to begin
with?

A work around for this might be to set two different leftid='s

But i dont see a need for aggressive mode in this setup.

Paul

_______________________________________________________________________
Zin in een slipcursus?
Kijk snel op http://www.axsweb.be