[Openswan Users] (no subject)

[Rui Santos]

Hi all,

I'm having a problem setting up a openswan connection using a vrrp address. I have the following configuration.

eth3: <BROADCAST,MULTICAST,UP,10000> mtu 1500 qdisc pfifo_fast qlen 100
    inet X.X.X.246/27 brd X.X.X.255 scope global eth3
    inet X.X.X.247/32 scope global eth3
       valid_lft forever preferred_lft forever

conn IPSEC
       type=tunnel
       leftsubnet=10.0.0.0/16
       leftnexthop=X.X.X.234
       left=X.X.X.247
       right=Y.Y.Y.Y
       rightsubnet=Y.Y.Y.Z/28
       rightnexthop=Y.Y.Y.H
       esp=3des-md5
       ike=3des-md5
       keyexchange=ike
       keylife=86400s
       ikelifetime=8h
       authby=secret
       pfs=no
       dpddelay=30
       dpdtimeout=120
       dpdaction=restart

When I try to setup the connection I get:
022 "IPSEC": We cannot identify ourselves with either end of this connection.

Is it possible to setup such connection?

Thanks
Rui Santos


-- 
___________________________________________________
Play 100s of games for FREE! http://games.mail.com