[Openswan Users] 021 no connection named "GDC1" Solved

[John Serink]

Was looking at the wrong log files.
2 options I had in the ipsec.conf file were form an
very old version of openswan. Deleted then and now it
loads.

Cheers,
John

--- John Serink <jserink2004 at yahoo.com> wrote:

> Hi Brain:
> 
> Thank you for getting back to me. The only stuff I
> have form my log files is in var/log/auth.log:
> Jun  1 10:46:59 localhost pluto[29442]: Starting
> Pluto
> (Openswan Version 2.2.0 X.509-1.5.4
> PLUTO_USES_KEYRR)
> Jun  1 10:46:59 localhost pluto[29442]:   including
> NAT-Traversal patch (Version 0.6c) [disabled]
> Jun  1 10:46:59 localhost pluto[29442]:
> ike_alg_register_enc(): Activating OAKLEY_AES_CBC:
> Ok
> (ret=0)
> Jun  1 10:46:59 localhost pluto[29442]: Using Linux
> 2.6 IPsec interface code
> Jun  1 10:47:00 localhost pluto[29442]: Changing to
> directory '/etc/ipsec.d/cacerts'
> Jun  1 10:47:00 localhost pluto[29442]: Could not
> change to directory '/etc/ipsec.d/aacerts'
> Jun  1 10:47:00 localhost pluto[29442]: Changing to
> directory '/etc/ipsec.d/ocspcerts'
> Jun  1 10:47:00 localhost pluto[29442]: Changing to
> directory '/etc/ipsec.d/crls'
> Jun  1 10:47:00 localhost pluto[29442]:   Warning:
> empty directory
> Jun  1 10:47:13 localhost pluto[29442]: listening
> for
> IKE messages
> Jun  1 10:47:13 localhost pluto[29442]: adding
> interface ppp1/ppp1 202.42.98.101
> Jun  1 10:47:13 localhost pluto[29442]: adding
> interface eth2/eth2 192.168.2.1
> Jun  1 10:47:13 localhost pluto[29442]: adding
> interface eth1/eth1 192.168.1.97
> Jun  1 10:47:13 localhost pluto[29442]: adding
> interface lo/lo 127.0.0.1
> Jun  1 10:47:13 localhost pluto[29442]: loading
> secrets from "/etc/ipsec.secrets"
> 
> And that was from I issued the command:
> ipsec pluto
> I'm still gettting this:
> rx1000test:~# ipsec auto --up GDC1
> 021 no connection named "GDC1"
> 
> But its not writing anything to the logs, I've
> checked
> them all.
> 
> Any tips?
> 
> Cheers,
> John
> 
> 
> --- Brian Candler <B.Candler at pobox.com> wrote:
> 
> > On Wed, May 31, 2006 at 11:51:36AM -0700, John
> > Serink wrote:
> > > rx1000test:~# ipsec auto --ready
> > > rx1000test:~# ipsec auto --up GDC1
> > > 021 no connection named "GDC1"
> > > 
> > > Now I can't figure that out! I looks like I have
> a
> > > conn names GDC1.
> > 
> > There's something broken in it. When you (re)start
> > pluto, look in your
> > syslog messages and you should get an explanation
> of
> > what's wrong.
> > 
> 
> 
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam
> protection around 
> http://mail.yahoo.com 
> _______________________________________________
> Users at openswan.org
> http://lists.openswan.org/mailman/listinfo/users
> Building and Integrating Virtual Private Networks
> with Openswan: 
>
http://www.amazon.com/gp/product/1904811256/104-3099591-2946327?n=283155
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com