[Openswan Users] net-to-net configuration

[Ian Firla]

Thanks. Pretty sure that I'd done that by issuing a

echo 1 > /proc/sys/net/ipv4/ip_forward

but still no luck. Will try to reboot both sides and try again...
thanks very much.

Ian

On 5/18/06, Paul Wouters <paul at xelerance.com> wrote:
> On Thu, 18 May 2006, Ian Firla wrote:
>
> > conn net-to-net
>
> >    leftsubnet=192.168.1.0/24       #
> >    rightsubnet=192.168.20.0/24        #
>
> > Raising the tunnel is successful:
>
> > From a client pc on the local lan (192.168.1.4), I can ping the
> > private ip address on the remote server (192.168.20.5) but I can't,
> > for example, ping anything behind it (ie. 192.168.20.41 or
> > 192.168.20.1).
> >
> > Yes, I've confirmed that those addresses are pingable from the remote gateway.
> >
> > Any ideas on what I should be looking at and where?
>
> enable ip forwarding on the gateway (/etc/sysctl.conf)
>
> Paul
>