[Openswan Users] PocketPc 2003 wont connect with Openswan.

[Sinikuub]

Hello.

Sry, but I didn't found any suitable message from threads, the problem is PocketPc and Openswan. W2k and XP client connects without any problems, but PocketPc client not. I searched and digged, but no help. 

I'm using Debian 3.1, with kernel 2.6.16-1-686, openswan and openswan-module 2.2.0-8 and l2tpd 0.70-pre200311.

/etc/ppp/options.l2tpd:
ipcp-accept-local
ipcp-accept-remote
noccp
auth
crtscts
idle 1800
mtu 1412
mru 1412
nodefaultroute
debug
lock
proxyarp
connect-delay 5000
require-mschap-v2

/etc/ipsec.conf:
config setup
klipsdebug=all
plutodebug="control parsing"
include /etc/ipsec.d/examples/no_oe.conf
include /etc/ipsec.d/L2TP-PSK-orgWIN2KXP.conf


/etc/ipsec.d/L2TP-PSK-orgWIN2KXP.conf:
conn L2TP-PSK-orgWIN2KXP
authby=secret
pfs=no
keyingtries=3
rekey=no
left=%defaultroute
leftprotoport=17/1701
right=%any
rightprotoport=17/%any
auto=add

    
And the the logs shows:
packet from 80.235.43.31:500: ignoring Vendor ID payload [MS NT5 ISAKMPOAKLEY 00000004]
May 16 16:03:46 lepamaim pluto[13786]: packet from 80.235.43.31:500: ignoring Vendor ID payload [FRAGMENTATION]
May 16 16:03:46 lepamaim pluto[13786]: packet from 80.235.43.31:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02_n] meth=106, but already using method 0
May 16 16:03:46 lepamaim pluto[13786]: packet from 80.235.43.31:500: ignoring Vendor ID payload [26244d38eddb61b3172a36e3d0cfb819]
May 16 16:03:46 lepamaim pluto[13786]: packet from 80.235.43.31:500: initial Main Mode message received on 213.184.48.45:500 but no connection has been authorized
May 16 16:04:16 lepamaim pluto[13786]: packet from 80.235.43.31:500: ignoring Delete SA payload: not encrypted
May 16 16:04:16 lepamaim pluto[13786]: packet from 80.235.43.31:500: received and ignored informational message


What is wrong? 



-- 

Sinikuub