[Openswan Users]

[Staikos, Aristides RDECOM CERDEC STCD]

How would I go about configuring to use NETKEY and not KLIPS if this is the issue.  

Aristides Staikos
S&TCD Special Projects Office (SPO)
Building 2700 (Myer Center)
AMSRD-CER-ST-SP
Fort Monmouth, NJ 07703
Phone: (732)427-4134
Fax: (732)427-6935
Cellular: (732)762-9343

-----Original Message-----
From: Paul Wouters [mailto:paul at xelerance.com] 
Sent: Monday, March 13, 2006 10:16 PM
To: Staikos, Aristides RDECOM CERDEC STCD
Cc: 'users at openswan.org'
Subject: Re: [Openswan Users]

On Thu, 9 Mar 2006, Staikos, Aristides RDECOM CERDEC STCD wrote:

> Date: Thu, 9 Mar 2006 12:48:48 -0500
> From: "Staikos, Aristides RDECOM CERDEC STCD" 
> <Aristides.Staikos at us.army.mil>
> To: "'users at openswan.org'" <users at openswan.org>
> Subject: [Openswan Users]
>
> I have been having trouble getting openswan to work with IPv6.  When the process goes through Quick Mode I get an error stating pfkey_write - SADB_X_ADDFLOW for tunnel failed:  Errno 96 Protocol Family not supported.  Has anyone seen this before and is there a solution to the problem.

KLIPS does not support IPv6, only NETKEY does. Is that the stack you are using?

Paul
--
Building and integrating Virtual Private Networks with Openswan:
http://www.amazon.com/gp/product/1904811256/104-3099591-2946327?n=283155