[Openswan Users] Openswan 2.4.7 and juniper ns208

[Paul Wouters]

On Thu, 7 Dec 2006, Paul Overton wrote:

> Subject: Re: [Openswan Users] Openswan 2.4.7 and juniper ns208
>
> You appear to be using NAT-T so you will not see ESP frames with
> tcpdump, you are more likeley to see encap UDP 4500 frames.

> > 003 "lt85_to_centre" #11: NAT-Traversal: Result using draft-ietf-ipsec-nat-t-ike-02/03: no NAT detected

Not in this case. NAT-T is supported, but no NAT is detected, so protocol ESP will be
used.

Paul
-- 
Building and integrating Virtual Private Networks with Openswan:
http://www.amazon.com/gp/product/1904811256/104-3099591-2946327?n=283155