[Openswan Users] Re-2: Re-6: VPN starts but fails two minutes later

Ludovic MARCILLY lmarcilly at aressi.fr
Wed Aug 23 09:17:40 EDT 2006

>> > Yes, to find out any potential failure or success, we would need to see the
>> > logs that detail the failure or success.
>> Aug 23 09:47:50 pluto[1707]: "Test" #2: IPsec SA established
>> Aug 23 09:47:53 l2tpd[1762]: start_pppd: I'm running:
>> Aug 23 09:47:53 pppd[1775]: Using interface ppp0
>> Aug 23 09:47:53 pppd[1775]: Connect: ppp0 <--> /dev/ttyp0
>> Aug 23 09:47:55 pppd[1775]: local  IP address
>> Aug 23 09:47:55 pppd[1775]: remote IP address
>> Aug 23 09:47:55 pppd[1775]: Script /etc/ppp/ip-up started (pid 1777)
>> Aug 23 09:47:55 netsecure: PPP has gone up on ppp0
>So that all looks good.

I'm ok.

> > Aug 23 09:48:05 ipsec_setup: Stopping Openswan IPsec...

> And then you shutdown openswan

I don't shutdown openswan... There is an other problem...

>> Aug 23 09:48:06 ipsec_setup: Starting Openswan IPsec 1.0.7...

>My guess is that there are various bugfixes needed that are not in openswan-1.

>> Yes, but i have to patch kernel so, even if i stay with my kernel version, i
have to use the new kernel...
>openswan-2 can build an ipsec module "out of tree", so you don't have to change
>the kernel sources. Though in your case, you would first have to unpatch the
>openswan-1 code.

Ok, i will consider it.
Thank you for your help.

L. Marcilly

More information about the Users mailing list