[Openswan Users] pinging one way and not the other

[mlist]

Norman Rasmussen a écrit :
> On 15/09/05, mlist <mlist at opendoor.fr> wrote:
> 
>>well gateway2 is already the default gateway for net2
> 
> Then all should be well in network 2 land.
> 
> If you apply all this logic to Network 1, what happens?
> 
> i.e. is either:
> 
> A. Gateway 1 the default Gateway for Network 1 or does
> B. the default gateway for network 1 know that 192.168.10.0/24 is via Gateway 1.
> 

well well.
gw1 has always been default gateway for net1 ...

again here is my route on gw 1:

192.168.10.0    82.224.208.254  255.255.255.0  UG 	eth1
82.224.208.0    0.0.0.0    255.255.255.0 	U	eth1
10.0.0.0        0.0.0.0    255.0.0.0       	U	eth0

i am not sure that line # 1 ( added when starting ipsec ) is correct, 
since 82.224.208.254 ( router on provider's side ) wont know nothing 
about 192.168.10.0.

trying a ip route add 192.168.10.0/24 via gw2's pubip gives me a 
"network unreachable" ).

but then i dont know what route i should put here.

and i am wondering if this is not more related to some kind of internal 
ipsec magic that route traffic between virtual ipsec0 interface.

i am kinda stuck...

any more pointers ?
-- 
thomas Constans
04 78 68 17 34
www.opendoor.fr
thomas.constans at opendoor.fr