[Openswan Users] Multiple subnets

[John A. Sullivan III]

On Wed, 2005-09-14 at 13:37 -0600, Justin B. Kay wrote:
> Ok,
> 
> I have my tunnel up and running.  On one side I have 192.168.0.0/24.  On the
> other I have 10.11.0.0/16 which I can get to.  I also have 10.1.0.0/16 that
> I should be able to get to (the 10.11.0.0 box has a route to 10.1.0.0).  I
> just don't have a route on the 192 side to get to 10.1.0.0.  Any ideas on
> how to get the routing done to make this work?
> 
<snip>
If I understand you correctly, you simply need to add another connection
definition for traffic between 192.168.0.0/24 and 10.1.0.0/16.  You
will, of course, need this on both gateways.

You can probably find this information in the very extensive *swan
documentation.  There are also some training slide shows for *swan at
http://iscs.sourceforge.net although these have become a little dated.
Hope this helps - John
-- 
John A. Sullivan III
Open Source Development Corporation
+1 207-985-7880
jsullivan at opensourcedevel.com

Financially sustainable open source development
http://www.opensourcedevel.com