[Openswan Users] again with pix

[lean]

The scenario is: my pc with openswan with a public IP xxx.xxx.xxx (over 
ppp0) and a subnet 192.168.0.0 on my eth0 interface; the pix on another 
site with a private ip natted to public ip yyy.yyy.yyy.yyy and a subnet 
10.0.0.0 on his inside interface.

ipsec.conf:

version 2.0

config setup
        interfaces="ipsec0=ppp0"
        klipsdebug=none
        #plutodebug=none
        #plutoload=%search
        #plutostart=%search
        uniqueids=yes
        nat_traversal=yes

conn %default
        keyingtries=0
        disablearrivalcheck=no
        authby=secret

conn pix
        #type = tunnel
        left=xxx.xxx.xxx.xxx
        leftsubnet=192.168.0.0/24
        leftprotoport=17/0
        #leftnexthop=%defaultroute
        right=yyy.yyy.yyy.yyy
        rightsubnet=10.0.0.0/24
        rightid="@this.is.false.com"
        rightprotoport=17/0
        authby=secret
        #esp=3des-md5-hmac
        #keyexchange = ike
        pfs=no
        auto=add

the pix conf:
pixfirewall(config)# sh conf
: Saved
: Written by enable_15 at 09:51:42.159 UTC Wed Oct 5 2005
PIX Version 6.3(1)
interface ethernet0 100full
interface ethernet1 100full
interface ethernet2 auto shutdown
nameif ethernet0 outside security0
nameif ethernet1 inside security100
nameif ethernet2 intf2 security4
enable password kd4q8INnfTMGlrxA encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
hostname pixfirewall
domain-name ciscopix.com
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol ils 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
names
access-list 100 permit ip 10.0.0.0 255.255.255.0 192.168.0.0 255.255.255.0
access-list openswan permit ip 10.0.0.0 255.255.255.0 192.168.0.0 
255.255.255.0
pager lines 24
mtu outside 1500
mtu inside 1500
mtu intf2 1500
ip address outside 172.17.32.13 255.255.128.0
ip address inside 10.0.0.1 255.255.255.0
no ip address intf2
ip audit info action alarm
ip audit attack action alarm
pdm logging informational 100
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list 100
nat (inside) 1 10.0.0.0 255.255.255.0 0 0
route outside 0.0.0.0 0.0.0.0 172.17.0.1 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 
1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
http server enable
http 0.0.0.0 0.0.0.0 outside
http 0.0.0.0 0.0.0.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
service resetinbound
crypto ipsec transform-set myset esp-3des esp-md5-hmac
crypto map mymap 10 ipsec-isakmp
crypto map mymap 10 match address openswan
crypto map mymap 10 set peer xxx.xxx.xxx
crypto map mymap 10 set transform-set myset
crypto map mymap interface outside
isakmp enable outside
isakmp key ******** address xxx.xxx.xxx netmask 255.255.255.255 no-xauth 
no-config-mode
isakmp nat-traversal 10
isakmp policy 10 authentication pre-share
isakmp policy 10 encryption 3des
isakmp policy 10 hash sha
isakmp policy 10 group 2
isakmp policy 10 lifetime 28800
telnet timeout 5
ssh 0.0.0.0 0.0.0.0 outside
ssh 0.0.0.0 0.0.0.0 inside
ssh timeout 60
console timeout 0
dhcpd address 10.0.0.2-10.0.0.30 inside
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd enable inside
username lelio password 130yZZ3y12bbgj6d encrypted privilege 2
terminal width 80
Cryptochecksum:6418d0ad0f58ae55469cf13168b83785