[Openswan Users] rpm for fc3 & nat-t

[sasa]

Hi,
also with kernel-2.6.12-1.1378_FC3 I have the same problem..

CONFIG_IPSEC_NAT_TRAVERSAL
make[1]: *** [nonint_oldconfig] Error 1
make: *** [nonint_oldconfig] Error 2
error: Bad exit status from /var/tmp/rpm-tmp.19355 (%prep)

RPM build errors:
    Bad exit status from /var/tmp/rpm-tmp.19355 (%prep)

still thanks.

        Salvatore.

----- Original Message ----- 
From: "Paul Wouters" <paul at xelerance.com>
To: "sasa" <sasa at shoponweb.it>
Cc: <users at openswan.org>
Sent: Wednesday, October 05, 2005 5:58 PM
Subject: Re: [Openswan Users] rpm for fc3 & nat-t


> On Wed, 5 Oct 2005, sasa wrote:
> 
> > Patch2020: openswan-2.4.0.kernel-2.6-natt.patch
> > ..
> > ..
> > %patch2020 -p1
> >
> > ..then I execute:
> >
> > #rpmbuild -bp --target=i686 kernel.spec
> >
> > ..but I have the following error:
> >
> > CONFIG_IPSEC_NAT_TRAVERSAL
> > make[1]: *** [nonint_oldconfig] Error 1
> > make: *** [nonint_oldconfig] Error 2
> > error: Bad exit status from /var/tmp/rpm-tmp.56626 (%prep)
> >
> > RPM build errors:
> >    Bad exit status from /var/tmp/rpm-tmp.56626 (%prep)
> >
> > why ?? where is the my mistake ??
> 
> You probably need to add CONFIG_IPSEC_NAT_TRAVERSAL=y to the supplied
> /usr/src/redhat/SOURCES/config-* kernel configuration files.
> 
> Paul
>