[Openswan Users] Tunnel to 0.0.0.0/0 except some addresses

[Paul Wouters]

On Mon, 28 Nov 2005, Tuomo Soini wrote:

> > I assume you are using netkey, because with klips this should work fine.
> > For netkey, you need on router1:
> >
> > conn pass-localnet1
> > 	left=ip-router1
> > 	right=ip-router3
>
> Is this 3 up here intentional?

it should have been router2, as the original ascii art diagram showed it.

Paul