[Openswan Users] openswan-2.4.0 compilation for linux-2.6.9

[naveen kumar]

Thanks for your reply.

The problem is fixed.For the first time when I was
doing auto --up the problem came.But after that I did
ipsec restart once and auto --up , then luckily the
tunnel got established.Now I dont have any problem as
I rebooted PC and tested the tunnels again and again.

For your Information : 

ipsec --version is showing Openswan 2.4.0 (klips ).
lsmod is showing the ipsec module inserted.
ipsec --barf is showing the mostly same output as it
shows incase of linux-2.4 kernels.

  Thanks
 Naveen.M



--- Paul Wouters <paul at xelerance.com> wrote:

> On Thu, 10 Nov 2005, naveen kumar wrote:
> 
> >  I have compiled openswan-2.4.0 for linux-2.6.9
> > kernel.Everything got compiled but when I do
> "ipsec
> > auto --up tunnel" the following error came.
> >
> > 104 "db1-ike" #17: STATE_MAIN_I1: initiate
> > 106 "db1-ike" #17: STATE_MAIN_I2: sent MI2,
> expecting
> > MR2
> > 108 "db1-ike" #17: STATE_MAIN_I3: sent MI3,
> expecting
> > MR3
> > 004 "db1-ike" #17: STATE_MAIN_I4: ISAKMP SA
> > established {auth=OAKLEY_PRESHARED_KEY
> > cipher=oakley_3des_cbc_192 prf=oakley_md5
> > group=modp1536}
> > 117 "db1-ike" #18: STATE_QUICK_I1: initiate
> > 003 "db1-ike" #18: ERROR: netlink response for Add
> SA
> > esp.6e87ffe1 at 192.168.2.125 included errno 2: No
> such
> > file or directory
> 
> Can you show me 'ipsec --version' and the output of
> 'lsmod'?
> Or optionally run 'ipsec barf' and put the output on
> website for me
> to look at.
> 
> Paul
> 
> 



		
__________________________________________________________ 
Enjoy this Diwali with Y! India Click here http://in.promos.yahoo.com/fabmall/index.html