[Openswan Users] Not passing the "STATE_QUICK_I1: initiate"

[Oliver Schulze L.]

Hi Andy,

>What addresses are you pinging to and from? That connection will allow
>packets ONLY from 192.168.150.1 to 10.1.254.63, and back.
>
>According to your route table, your eth1 interface is in network
>192.168.150.0/24, but you say that has no hosts attached. So I presume
>the interface itself is 192.168.150.1? 
>
Thats right. Sorry I miss to explain it.

>In that case you need to force
>that address as the source in your pings - try 
>  ping -I 192.168.150.1 10.1.254.63
>  
>
Yes, this is the way I run ping

>The host at 10.1.254.63 will need a route back to you as well, of
>course.
>
>  
>
This, I must check. This issue can be the problem.

>You do have IP forwarding enabled, right?
>  
>
Yes

Also, the traceroute seems not to work:
traceroute -n 10.1.254.63 -s 192.168.150.1

Thanks
Oliver

-- 
Oliver Schulze L.
<oliver at samera.com.py>