[Openswan Users] _plutorun/_plutoload stops after shell logout

[Paul Wouters]

On Tue, 10 May 2005, netvipe wrote:

>>> my problem starts after i've left the shell (from where i've started the
>>> ipsec init script). when i logout, the ike process

>>> some info's about the system:
>>> - x86 (pentium IIT) hardware with 2.4.29-grsec kernel
>>> - os resides on a flash module and is based on uClibc
>>> - /etc, /var and /tmp are writeable (tmpfs)
>>> - busybox provides most services (incl. init)
>>> - sh replaced by bash (3.00.16(2))

> i followed your hint and updated to openswan 2.3.1 but unfortunatly
> nothing changed.

> ...but there is a new entry in the logfile:
>
> May 10 15:54:35 pluto[16652]: Pluto ignores SIGHUP -- perhaps you want
> "whack --listen"
> May 10 15:54:35 pluto[16652]: ADNS process terminated by signal 1
> May 10 15:54:35 pluto[16652]: closing helper(0) pid=17207 fd=6 exit=0
> May 10 15:54:35 pluto[16652]: reapchild failed with errno=10 No child
> processes
>
>
> not sure if sshd is the fault. i would also tend to some "weird shell
> issue".

Does your unit have a serial console? Can you try and start it from the
serial console, and then quit the console and see what happens? Then we can
at least pinpoint it to openssh's sshd with openswan.

I opened this as http://bugs.xelerance.com/view.php?id=297

Paul