[Openswan Users] VPN Routing problem

[amd at qcs.net.au]

I was wondering yet if it is possible to route through a swan tunnel:

Roadwarrior (192.168.2.1)
|
|
|
VPN Gateway(inet IP)
Internal NIC (10.1.2.253)
 Static route added on linux machine so networks can communicate(route
add -net 10.1.2.0/24 gw 10.2.2.1) Aliased IP on internal NIC(10.2.2.10/24)
|
|
|
Cisco Router interface(10.2.2.1/24)
 Static route added here (ip route 10.1.2.253 255.255.255.255 10.2.2.10)
 Static route added here (ip route 192.168.2.0 255.255.255.0 10.1.2.253)
|
|
|
Host on 10.1.2.0/24


Logging in to the Linux box I can ping nodes on the 10.1.2.0/24 net fine and
also ping the vpn gateway internal interface from any node on the
10.1.2.0/24 network.
The road warrior authenticates fine but can only ping the internal interface
on the vpn gateway (10.1.2.253).

thanks,

Steve