[Openswan Users] - Building module saga (was: kernel panic )

mario.lobo at ipad.com.br mario.lobo at ipad.com.br
Thu Mar 10 09:12:30 CET 2005


let me comment on your comments

> On Thu, 10 Mar 2005 mario.lobo at ipad.com.br wrote:
> 
> > Machine 10.2.1.98 is auto=add
> > Machine 10.2.1.99 is auto=start
> > 
> > When negociations start, I get what you see bellow:
> > 
> > ========================================
> > 
> > [ /var/log/secure ]
> > 
> > Mar 10 07:41:13 Spyket ipsec__plutorun: Starting Pluto subsystem...
> > Mar 10 07:41:14 Spyket pluto[2595]: Starting Pluto (Openswan Version 2.CVSHEAD X.509-1.5.4 
> > PLUTO_SENDS_VENDORID PLUTO_USES_KEYRR; Vendor ID OEEFBy\177du|_[)
> 
> That line looks a bit bad, Michael? Is there a problem in head with our
> vendorid?
> > "/etc/spyket/conf/vpn/secrets/centro.secrets"
> > Mar 10 07:43:37 Spyket pluto[2595]: packet from 10.2.1.99:500: received Vendor ID payload [Openswan 
> > (this version) 2.CVSHEAD  X.509-1.5.4 PLUTO_SENDS_VENDORID PLUTO_USES_KEYRR]
> > Mar 10 07:43:37 Spyket pluto[2595]: packet from 10.2.1.99:500: received Vendor ID payload [Dead 
> > Peer Detection]
> > Mar 10 07:43:37 Spyket pluto[2595]: "centro" #1: responding to Main Mode
> > Mar 10 07:43:37 Spyket pluto[2595]: "centro" #1: transition from state STATE_MAIN_R0 to state 
> > STATE_MAIN_R1
> > Mar 10 07:43:37 Spyket pluto[2595]: "centro" #1: transition from state STATE_MAIN_R1 to state 
> > STATE_MAIN_R2
> > Mar 10 07:43:37 Spyket pluto[2595]: "centro" #1: Main mode peer ID is ID_FQDN: '@ponta1-right'
> > Mar 10 07:43:37 Spyket pluto[2595]: "centro" #1: I did not send a certificate because I do not have 
> > one.
> > Mar 10 07:43:37 Spyket pluto[2595]: "centro" #1: transition from state STATE_MAIN_R2 to state 
> > STATE_MAIN_R3
> > Mar 10 07:43:37 Spyket pluto[2595]: "centro" #1: sent MR3, ISAKMP SA established
> > Mar 10 07:43:38 Spyket pluto[2595]: "centro" #2: responding to Quick Mode {msgid:30366b6f}
> 
> So far so good, but there should be more then this.

only if I use klipsdebug=all / plutodebug=all. Other than that, this is the FULL output from 
/var/log/secure.

>  
> > ===> Here is when I get the kernel messages bellow
> > 
> > Mar 10 07:43:48 Spyket ipsec__plutorun: Restarting Pluto subsystem...
> > 
> > 
> > [ Kernel Messages: ]
> > 
> > Mar 10 07:43:38 Spyket kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000000
> 
> yes, unloading klips causes this failure. I thought we removed unloading the
> module from cvs. Are you running a fresh cvs checkout or could this tree be
> a few weeks old?

Well the Kernel messages appear BEFORE the restart. Right after

 Mar 10 07:43:38 Spyket pluto[2595]: "centro" #2: responding to Quick Mode {msgid:30366b6f}

appears.

cvs heckout at Mar 9 15:14.

> Paul

-- 
   //|  //||
  // | // ||
-//--//---|| ARIO LOBO
//  //    ||
---------------------------------
mario.lobo at ipad.com.br
http://www.ipad.com.br



More information about the Users mailing list