[Openswan Users] A working sample linux-linux ipsec conf with
PSK searched !
normanr at gmail.com
Wed Jun 22 14:43:50 CEST 2005
ahh, there's the rub. I would assume that you set a letfsubnet and
rightsubnet in the connection.
On 22/06/05, foren titze <foren.titze at gmx.net> wrote:
> yes, but what config change?
> ---------- Weitergeleitete Nachricht ----------
> Subject: Re: [Openswan Users] A working sample linux-linux ipsec conf with PSK
> searched !
> Date: Mittwoch, 22. Juni 2005 12:24
> From: Norman Rasmussen <normanr at gmail.com>
> To: foren titze <foren.titze at gmx.net>
> Cc: users at openswan.org
> l2tp is what gives you the ip 'from the server'. I've never tried but
> i think you can set up a net-to-net connection with ipsec, but
> obviously requires a config change
> On 22/06/05, foren titze <foren.titze at gmx.net> wrote:
> > hello,
> > I habe an working windowsXP/l2tp/ipsec to linux/l2tp/ipsec connection,
> > but when I try to open a tunnel from linux to linux only per ipsec without
> > l2tp I don't get an IP from the server and whatever I have tried (setup a
> > route manually ...) I can't ping though the tunnel.
> > Do I have to make always two connections? one to the server and one to the
> > subnet behind him? like conn-gw and conn-gw-subnet
> > My setup is Openswan 2.3.1 with kernel Openswan U2.3.1/K22.214.171.124 on Debian
> > stable. I have compiled all by myself.
> > has anyone an idea?
> > Thanks Ben
> > _______________________________________________
> > Users mailing list
> > Users at openswan.org
> > http://lists.openswan.org/mailman/listinfo/users
> - Norman Rasmussen
> - Email: norman at rasmussen.co.za
> - Home page: http://norman.rasmussen.co.za/
> Users mailing list
> Users at openswan.org
- Norman Rasmussen
- Email: norman at rasmussen.co.za
- Home page: http://norman.rasmussen.co.za/
More information about the Users