[Openswan Users] pluto aborted

[Bryan McAninch]

I've also encountered this problem, seems to be a SIGABRT. The output below
is from 2.3.1, but this has also happened with earlier versions, 2.2.1 IIRC.


Jun 12 20:37:39 fusion pluto[27096]: "laptop" #8556:
Jun 12 20:37:39 fusion kernel: grsec: From w.x.y.z: signal 6 sent to
/usr/local/libexec/ipsec/pluto[pluto:27096] uid/euid:0/0 gid/egid:0/0,
parent /usr/local/lib/ipsec/_plutorun[_plutorun:26913] uid/euid:0/0
 gid/egid:0/0
Jun 12 20:37:39 fusion ipsec__plutorun: /usr/local/lib/ipsec/_plutorun: line
1: 27096 Aborted                 /usr/local/libexec/ipsec/pluto --nofork
--secretsfile /etc/ipsec.secrets --ipsecdir /etc/ipsec.d --d
ebug-none --uniqueids
Jun 12 20:37:39 fusion ipsec__plutorun: !pluto failure!:  exited with error
status 134 (signal 6)
Jun 12 20:37:39 fusion ipsec__plutorun: restarting IPsec after pause...
Jun 12 20:37:50 fusion ipsec_setup: Removing orphaned
/var/run/pluto/pluto.pid:
Jun 12 20:37:51 fusion ipsec__plutorun: Restarting Pluto subsystem...

 

-----Original Message-----
From: users-bounces at openswan.org [mailto:users-bounces at openswan.org] On
Behalf Of nw at sbs.de
Sent: Wednesday, June 15, 2005 09:15 AM
To: users at openswan.org
Subject: [Openswan Users] pluto aborted

Hello,
some time ago I posted about a problem with an aborting pluto.
The problems seemed to have gone when upgragin to openswan 2.3.1.
Now it is back again and I have no clue, where it comes from:
 ISAKMP SA established); EVENT_SA_REPLACE in 3329s; newest ISAKMP; nodpd Jun
15 16:06:13 lnxmchp4 pluto[21586]: "l2tp-winxp"[10] 217.9.111.209:1392 #10:
Jun 15 16:06:13 lnxmchp4 ipsec__plutorun: /usr/lib/ipsec/_plutorun: line
221: 21586 Aborted                 /usr/libexec/ipsec/pluto --nofork
--secretsfile /etc/ipsec.secrets --ipsecdir /etc/ipsec.d --debug-all
--uniqueids --nat_traversal --virtual_private
%v4:10.0.0.0/8,%v4:172.16.0.0/12,%v4:192.168.0.0/16
Jun 15 16:06:13 lnxmchp4 ipsec__plutorun: !pluto failure!:  exited with
error status 134 (signal 6) Jun 15 16:06:13 lnxmchp4 ipsec__plutorun:
restarting IPsec after pause...
Jun 15 16:06:23 lnxmchp4 kernel: NET: Unregistered protocol family 15 Jun 15
16:06:24 lnxmchp4 ipsec_setup: ...Openswan IPsec stopped

This aborting did not appear for two months. Now I had it sometimes within
minutes.
I' ve tried the versions 2.3.1, 2.3.1 and 2.2.9 coming with Suse9.2

Is this solved in  any cvs version? Any other idea on to avoid that problem?
What information would be needed to track that problem down?

Any help would be *really* appreciated.

Norbert

--
_______________________________________________
Users mailing list
Users at openswan.org
http://lists.openswan.org/mailman/listinfo/users