[Openswan Users] Strongswan not routing XP client
Craig Chandler
Craig.Chandler at InterDynamics.com
Thu Jan 27 12:50:43 CET 2005
Hi all, i'm trying to configure a VPN tunnel through a Strongswan
gateway like this:-
o|Gateway|o=================o|XP Client
192.168.0.50 192.168.34.1 192.168.34.137
||
||
||
||
o
-
internal lan
192.168.0.1
currently i can ping the 192.168.0.50 from the XP client but not
192.168.0.1 and i cant work out why...?
kernel version 2.6.10
Strongswan version 2.3.0
ipsec.conf file
config setup
interfaces="ipsec0=eth1"
# Sample VPN connection
conn %default
authby=rsasig
# Local security gateway and subnet behind it.
left=192.168.34.1
leftsubnet=192.168.0.0/24
# Certificate of local security gateway
leftrsasigkey=%cert
leftcert=shtkicker-cert.pem
auto=add
conn roving
right=192.168.34.137
rightrsasigkey=%cert
rightcert=client-cert.pem
auto=add
Gateway route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use
Iface
192.168.34.137 192.168.34.137 255.255.255.255 UGH 0 0 0 eth1
192.168.34.0 * 255.255.255.0 U 0 0 0 eth1
192.168.0.0 * 255.255.255.0 U 0 0 0 eth0
default 192.168.0.1 0.0.0.0 UG 0 0 0 eth0
XP Client route
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.34.1 192.168.34.137 1
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
192.168.34.0 255.255.255.0 192.168.34.137 192.168.34.137 1
192.168.34.137 255.255.255.255 127.0.0.1 127.0.0.1 1
192.168.34.255 255.255.255.255 192.168.34.137 192.168.34.137 1
224.0.0.0 224.0.0.0 192.168.34.137 192.168.34.137 1
255.255.255.255 255.255.255.255 192.168.34.137 192.168.34.137 1
Default Gateway: 192.168.34.1
===========================================================================
regards
More information about the Users
mailing list