[Openswan Users] post tunnel creation question.

[Gary W. Smith]

I'm new to ipsec so forgive me if this is simple. 

I have looked over both the freeswan and openswan sites and can't really
find what I am looking for.  I have established a tunnel between two
firewalls and everything appears to be working with the exception of
routing.

I can't ping either end of the network, including the initiator, over
the tunnel.

The routes look like this on the initiators side:

63.185.225.128  0.0.0.0         255.255.255.128 U     0      0        0
eth0
10.94.16.0      63.185.225.129  255.255.255.0   UG    0      0        0
eth0
10.0.0.0        0.0.0.0         255.255.255.0   U     0      0        0
eth1
169.254.0.0     0.0.0.0         255.255.0.0     U     0      0        0
eth1
0.0.0.0         63.185.225.129  0.0.0.0         UG    0      0        0
eth0

The 10.94.16.x is the remote network.  The other site looks about the
same (except pointing to this lan on eth0).

I have this in both configs:

conn a-to-b
        type=tunnel
        left=63.185.225.254
        leftsubnet=10.0.0.0/16
        leftid=@location.a
        leftrsasigkey=0soLLYAb7EUYCi+FbByIJOwMbH0F99W2EvBF3+zHnp
        leftnexthop=%defaultroute
        right=83.29.32.49
        rightsubnet=10.94.16.0/24
        rightid=@locationb
        rightrsasigkey=0sYXVoyk7PBn4toDslSw5EBGWPJS/u9x9uQasxuBm
        rightnexthop=%defaultroute
        auto=add


Did I miss something?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openswan.org/pipermail/users/attachments/20050114/8b6b689b/attachment.htm