[Openswan Users]

[Marcus Leech]

I'm using FC3 with 2.6.10-1.766 kernel.  I couldn't get KLIPS to work
  beyond the most superficial definition of "work".  I had to revert to
  NETKEY, which has its own problems--like you can only do one
  cycle of connection up/down, between restarts of OpenSwan. [The EAGAIN
  problem we were discussing].

Paul Wouters wrote:

> On Mon, 28 Feb 2005, panos wrote:
>
>> Basically I am trying to setup a simple tunnel in manual mode.  This
>> worked on 2.4 kernel (RH9) and openswan-2.2.0.  I am now trying the same
>> config under FC3 openswan-2.3.0 and its not working.
>
>
> Manual keying is very likely broken with Openswan when using NETKEY. The
> most sensible thing is not to use manual keying, but automatic keying. If
> you really insist on manual keying despite the strong recommendation to
> switch, try using KLIPS instead of NETKEY.
>
> Paul
> _______________________________________________
> Users mailing list
> Users at openswan.org
> http://lists.openswan.org/mailman/listinfo/users
>
>