[Openswan Users] Bridging lan over wireless link
Gary W. Smith
gary at primeexalia.com
Sun Feb 6 23:16:41 CET 2005
I'd check with the Netfilter (iptables) group. The routing is tricky
but I'm sure it can be done.
Is there a particular need for the bridge? Doesn't that add undue
traffic over the wireless? Why not segment the network using the bridge
as routers.
> -----Original Message-----
> From: users-bounces at openswan.org [mailto:users-bounces at openswan.org]
On
> Behalf Of Joost Kraaijeveld
> Sent: Sunday, February 06, 2005 3:02 AM
> To: Users Openswan (E-mail)
> Subject: [Openswan Users] Bridging lan over wireless link
>
> Hi all,
>
> I want to create a bridge (see picture below) between 2 LANs with the
same
> IP range (192.168.0.0/24) using 2 wireless links that use load sharing
> over multiple interfaces (as descibed here:
> http://lartc.org/howto/lartc.loadshare.html) for load balancing and
fault
> tolerance. Both links should use IPsec for encryption.
>
> I have googled for an example that does this but I could not find it.
>
> Is this possible? Not in threory but in practise: has anyone done
this? If
> so, can anyone give me an example/pointer to an example of how to do
this?
>
>
> ________ ________
> | | | |
> | ant1.1 |---| ant2.1 |
> |________| |________|
> _________ | | _________
> | |-eth1-+ +--eth1-| |
> lan1 --eth0-| bridge1 | | bridge2
|-eth0--lan2
> |_________|-eth2-+ +--eth2-|_________|
> ____|___ ____|___
> | | | |
> | ant1.2 |---| ant2.2 |
> |________| |________|
>
>
>
>
> Groeten,
>
> Joost Kraaijeveld
> Askesis B.V.
> Molukkenstraat 14
> 6524NB Nijmegen
> tel: 024-3888063 / 06-51855277
> fax: 024-3608416
> e-mail: J.Kraaijeveld at Askesis.nl
> web: www.askesis.nl
> _______________________________________________
> Users mailing list
> Users at openswan.org
> http://lists.openswan.org/mailman/listinfo/users
More information about the Users
mailing list