[Openswan Users] Time Out on road-warrior connection

[sasa]

Hi, I have a problem with a road-warrior connection, the IPsec SA
established and also ping is ok, but I don't try to use a network resource
on remote server, for example with Terminal Service I have a Timed Out error
message, but also with shared directory on remote server I have the same 
problem.

My conf is:

config setup
interfaces="ipsec0=eth0"
nat_traversal=yes
virtual_private=%v4:10.0.0.0/8,%v4:172.16.0.0/12,%v4:192.168.1.0/16,%v4:!192.168.0.0/24

conn %default
authby=secret
rekey=no

conn left-road
auto=add
authby=secret
pfs=no
#sede A uff left (sede principale)
#left indica ip pub della eth0 sul fw
left=1.2.3.4
leftnexthop=1.2.3.5
 leftprotoport=17/1701
#sede B road
right=%any
rightprotoport=17/1701
rightsubnet=vhost:%no,%priv
include /etc/ipsec.d/examples/no_oe.conf

l2tpd.conf

[global]
listen-addr = 192.168.0.253
port = 1701
[lns default]
ip range = 192.168.0.160-192.168.0.165
local ip = 192.168.0.166
require chap = yes
refuse pap = yes
require authentication = yes
name = LinuxVPNserver
ppp debug = yes
pppoptfile = /etc/ppp/options.l2tpd
length bit = yes

options.l2tpd

ipcp-accept-local
ipcp-accept-remote
ms-dns  192.168.0.2
noccp
auth
crtscts
idle 1800
mtu 1410
mru 1410
nodefaultroute
debug
lock
proxyarp
connect-delay 5000

I use:
openswan 2.4.4-1
l2tpd-0.69-13

thanks.

------
Salvatore.