[Openswan Users] dsl to dsl vpn

[heath bunting]

dear all

thanks so far for your help

when i try to start the connection with

/usr/sbin/ipsec auto --up net-to-net

using the below config file

i get:

Dec  1 22:38:51 clear pluto[3955]: "net-to-net" #1: ERROR: asynchronous 
network error report on eth0 for message to 10.0.0.1 port 500, complainant 
10.0.0.128: No route to host [errno 113, origin ICMP type 3 code 1 (not 
authenticated)]
Dec  1 22:39:31 clear pluto[3955]: unknown cmsg: level 0, type 8, len 24
Dec  1 22:39:31 clear pluto[3955]: "net-to-net" #1: ERROR: asynchronous 
network error report on eth0 for message to 10.0.0.1 port 500, complainant 
10.0.0.128: No route to host [errno 113, origin ICMP type 3 code 1 (not 
authenticated)]
Dec  1 22:40:11 clear pluto[3955]: unknown cmsg: level 0, type 8, len 24
D

can somebody tell me whats going wrong ?

many thanks

heath

--

version 2.0     # conforms to second version of ipsec.conf specification

# basic configuration
config setup

conn net-to-net
     left=10.0.0.1
     leftnexthop=212.159.64.84
     leftsubnet=10.0.0.8/29
     leftid=@factory.bristol-glass.co.uk
     leftrsasigkey=0sAQOxy2v8W+cRwd ...
     right=10.0.0.128
     rightnexthop=80.177.165.240
     rightsubnet=10.0.0.144/28
     rightid=@porlock.bristol-glass.co.uk
     rightrsasigkey=0sAQO7BpaUyeMqK7ufP ...
     auto=add                       # authorizes but doesn't start this
                                    # connection at startup

#Disable Opportunistic Encryption
include /etc/ipsec.d/examples/no_oe.conf