[Openswan Users] klips Warning: unknown symbol
Christopher Malott
chris at travelconnection.com
Wed Aug 24 15:56:53 CEST 2005
Also make sure you are NOT building a kernel with SMP support enabled.
Even when I'd compile KLIPS statically into the kernel and SMP was
enabled it would still fail with a similar error.
This is on a FC4 box with a vanilla 2.4.12.4 kernel from kernel.org.
Chris
Norbert Wegener wrote:
> Those errors should go away, when you compile KLIPS statically in the
> kernel and not as a module.
> Norbert
>
> Giovani Moda - MR Informática wrote:
>
>> Hey folks,
>>
>> I know there's been already some posts about it, but I'm trying to
>> compile 2.4.0rc3 on several boxes, and I'm getting always the same
>> errors when modprobing ipsec module:
>>
>> Unknown symbol des_ede3_cbc_encrypt
>> Unknown symbol ipsec_3des_init
>> Unknown symbol des_check_key
>> Unknown symbol ipsec_aes_init
>>
>> So far I have tried FC2 kernel 2.6.10-1.771, FC2 with vanilla kernel
>> 2.6.10, FC2 with vanilla kernel 2.6.12.5 and debian sarge with vanilla
>> kernel 2.6.12.5. They all present the same problem.
>>
>> I believe that's a problem with openswan patch or ipsec module, and
>> not with the kernels. Let me know if that's something I'm doing wrong
>> or if I should wait a little bit more before compiling klips with 2.6
>> kernels.
>>
>> BTW: I saw something in this list about openswan-2.3.1 with KLIPS
>> working on an FC2 box with vanilla kernel. I tried it out, compiled a
>> 2.6.10 vanilla kernel in an FC2 box, and still got kernel panic when
>> stabilishing the tunnel. Have anyone had any luck with that?
>>
>> Cheers,
>>
>> Giovani
>> _______________________________________________
>> Users mailing list
>> Users at openswan.org
>> http://lists.openswan.org/mailman/listinfo/users
>
>
>
> _______________________________________________
> Users mailing list
> Users at openswan.org
> http://lists.openswan.org/mailman/listinfo/users
More information about the Users
mailing list