[Openswan Users] Backup Link
Potato Chip
jc-openswan at jline.com
Mon Aug 15 14:40:23 CEST 2005
That network diagram did not come out quite right. It's a simple
configuration, but let me try that again.
<== linux gateway ==>
(123.123.123.1)
Remote Host
Network Network
(192.168.3.0) (192.168.1.0)
<== linksys backup ==>
(123.123.123.2)
-----Original Message-----
From: users-bounces at openswan.org [mailto:users-bounces at openswan.org] On
Behalf Of Potato Chip
Sent: Monday, August 15, 2005 1:14 PM
To: users at openswan.org
Subject: [Openswan Users] Backup Link
Hi, I am hoping I can get some pointers or tips regarding setting up a
backup IPSEC link for an office to office connection. In my situation, I
am looking to create hardware redundancy over the same DSL line. There
currently exists a linux server serving as the SA. I would like to add a
linksys IPSEC/VPN router to serve as a backup in case the linux server
were to ever go down.
I would like to make the backup linksys box as transparent as possible.
The main issue I see is how to have 2 configurations on the host
security gateway, connect to the same remote subnet via 2 different
public ipaddresses. Picture below:
<== linux gateway ==>
(123.123.123.1)
Remote network Host
network
(192.168.3.0)
(192.168.1.0)
<== linksys backup gateway ==>
(123.123.123.2)
Any help is appreciated! Thanks,
Jay
_______________________________________________
Users mailing list
Users at openswan.org http://lists.openswan.org/mailman/listinfo/users
More information about the Users
mailing list