[Openswan Users] Openswan + L2TP
Marcos Ferreira da Silva
marcosfs at centershop.com.br
Sat Aug 13 15:56:19 CEST 2005
Now I have another problem.
I change my client to win98SE.
It connect at port 500 but don't connect at l2tp.
ipsec log:
Aug 13 14:53:07 f001 pluto[4195]: "roadwarrior-l2tp"[1] 192.168.1.2 #2:
IPsec SA established {ESP=>0x26faea7a <0x01b0b0fc xfrm=3DES_0-HMAC_SHA1
IPCOMP=>0x0000b9b0 <0x0000a911}
Aug 13 14:53:07 f001 pluto[4195]: | modecfg pull: noquirk policy:push
not-client
Aug 13 14:53:07 f001 pluto[4195]: | phase 1 is done, looking for phase 1
to unpend
Aug 13 14:53:07 f001 pluto[4195]: | next event EVENT_NAT_T_KEEPALIVE in
19 seconds
Aug 13 14:53:26 f001 pluto[4195]: |
Aug 13 14:53:26 f001 pluto[4195]: | *time to handle event
Aug 13 14:53:26 f001 pluto[4195]: | handling event EVENT_NAT_T_KEEPALIVE
Aug 13 14:53:26 f001 pluto[4195]: | event after this is
EVENT_PENDING_PHASE2 in 83 seconds
Aug 13 14:53:26 f001 pluto[4195]: | processing connection
roadwarrior-l2tp[1] 192.168.1.2
Aug 13 14:53:26 f001 pluto[4195]: | processing connection
roadwarrior-l2tp[1] 192.168.1.2
Aug 13 14:53:26 f001 pluto[4195]: | next event EVENT_PENDING_PHASE2 in
83 seconds
ipsec auto --status:
000 #2: "roadwarrior-l2tp"[1] 192.168.1.2:500 STATE_QUICK_R2 (IPsec SA
established); EVENT_SA_REPLACE in 3249s; newest IPSEC; eroute owner
000 #2: "roadwarrior-l2tp"[1] 192.168.1.2 esp.26faea7a at 192.168.1.2
esp.1b0b0fc at 192.168.1.1 comp.b9b0 at 192.168.1.2 comp.a911 at 192.168.1.1
000 #1: "roadwarrior-l2tp"[1] 192.168.1.2:500 STATE_MAIN_R3 (sent MR3,
ISAKMP SA established); EVENT_SA_REPLACE in 14048s; newest ISAKMP; nodpd
I install msl2tp.exe.
Marcos
More information about the Users
mailing list