[Openswan Users] Openswan + L2TP

Norman Rasmussen normanr at gmail.com
Sat Aug 13 01:20:42 CEST 2005


FYI: in /etc/ppp/options.l2tpdipcp-accept-local you might want to add 'name'

this is what my debian system has:

# Name of the local system for authentication purposes
# (must match the second field in /etc/ppp/chap-secrets entries)
name l2tpd

On 13/08/05, Norman Rasmussen <normanr at gmail.com> wrote:
> > Cliente: 192.168.1.2
> > Server: 192.168.1.1
> > Network:  192.168.99.0/24
> 
> um, I assume the server has another network card with an ip in the
> network range?
> 
> more like (THIS IS AN EXAMPLE)
> Server:
> eth0: 192.168.1.1 (network 192.168.1.0/24)
> eth1: 192.168.99.1 (network 192.168.99.0/24)
> 
> I guess you could do it via aliasing too (i.e. eth0 and eth0:1)
> 
> On 12/08/05, Marcos Ferreira da Silva <marcosfs at centershop.com.br> wrote:
> > Em Sex, 2005-08-12 às 21:39 +0200, Jacco de Leeuw escreveu:
> > > Marcos Ferreira da Silva wrote:
> > >
> > > > Could I run a script when the client connect and get the IP?
> > >
> > > Well, there's the /etc/ppp/ip-up script (man pppd)...
> > >
> >
> > ok.  I put my firewall rules in ip-up and ip-down.  It's ok.
> >
> > > > /usr/sbin/pppd: The remote system is required to authenticate itself
> > > > /usr/sbin/pppd: but I couldn't find any suitable secret (password) for
> > > > it to use to do so.
> > > > /usr/sbin/pppd: (None of the available passwords would let it use an IP
> > > > address.)
> > > >
> > > > /etc/ppp/chap-secrets
> > > > *       markin  "teste" 192.168.99.130
> > > > markin  *       "teste" 192.168.99.130
> > >
> > > Perhaps 192.168.99.130 is not within the 'ip range'
> > > in l2tpd.conf? Or you configured a static virtual IP
> > > address on the client which is not 192.168.99.130?
> >
> > When i put noauth it get the IP 192.168.99.30.
> > My range is 192.168.99.128-192.168.99.254.
> >
> > My network test is
> >
> > Client --- Server --- Network
> >
> > Cliente: 192.168.1.2
> > Server: 192.168.1.1
> > Network:  192.168.99.0/24
> >
> > Could be this error because my client and server is in the same route?
> >
> > Marcos
> >
> > _______________________________________________
> > Users mailing list
> > Users at openswan.org
> > http://lists.openswan.org/mailman/listinfo/users
> >
> 
> 
> --
> - Norman Rasmussen
>  - Email: norman at rasmussen.co.za
>  - Home page: http://norman.rasmussen.co.za/
> 


-- 
- Norman Rasmussen
 - Email: norman at rasmussen.co.za
 - Home page: http://norman.rasmussen.co.za/


More information about the Users mailing list