[Openswan Users] pppoe openswan 2.3.1

[Ted Kaczmarek]

KLIPS ipsec0 on ppp0 68.193.67.53/255.255.255.255 pointopoint 10.5.7.1

Phase 1 completes, get to phase 2 and ..... 

I have never used a ppp0 interface for openswan before, had some issue
with pppoe and connection tracking, but not using parent of logical
interface take care of that.

I poured over the barfs and nothing jumped out at me, the policies
appear to be matching, and esp traffic is forwarded  from both sides for
interesting packets.

Forced the mtu of the non ppp0e machine down to match the peer at 1492.

These are both Centos 4.1 machines with openswan-2.3.1-1 and2.6.9-11.EL
the one without the pppo (ppoe)  works fine to a FC1 machine running
2.1.5 with the patch for the snmp crash applied.

Any thing else I should try?

Regards,

Ted