[Openswan Users] Problem to install openswan with Kernel 2.4

Mon Apr 18 15:47:03 CEST 2005

thx Paul for the tip. I installed the Install gmp-devel. Then I make his
http://lists.virus.org/users-openswan-0411/msg00174.html.
Openswan was installed, but then the Kernel didn't work accurate.

Inspecting /boot/System.map
Loaded 21368 symbols from /boot/System.map.
Symbols match kernel version 2.4.21.
Loaded 6 symbols from 1 module.
klogd 1.4.1, log source = ksyslog started.
<4>Linux version 2.4.21-300-athlon-TEST (root at duplo) (gcc version 3.3.1
(SuSE Linux)) #2 Mon Apr 18 11:07:17 CEST 2005
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000001ffec000 (usable)
<4> BIOS-e820: 000000001ffec000 - 000000001ffef000 (ACPI data)
<4> BIOS-e820: 000000001ffef000 - 000000001ffff000 (reserved)
<4> BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
<4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
<5>501MB vmalloc/ioremap area available.
<5>0MB HIGHMEM available.
<5>511MB LOWMEM available.
<7>ACPI: have wakeup address 0xc0001000
<4>On node 0 totalpages: 131052
<4>zone(0): 4096 pages.
<4>zone(1): 126956 pages.
<4>zone(2): 0 pages.
<6>ACPI: RSDP (v000 ASUS                       ) @ 0x000f6a90
<6>ACPI: RSDT (v001 ASUS   A7V      12336.12337) @ 0x1ffec000
<6>ACPI: FADT (v001 ASUS   A7V      12336.12337) @ 0x1ffec080
<6>ACPI: BOOT (v001 ASUS   A7V      12336.12337) @ 0x1ffec040
<6>ACPI: DSDT (v001   ASUS A7V      00000.04096) @ 0x00000000
<5>ACPI: Skipping APIC setup
<4>Building zonelist for node : 0
<4>Kernel command line: root=/dev/hda7 vga=0x31a desktop splash=silent
<6>bootsplash: silent mode.
<6>Initializing CPU#0
<4>Detected 908.139 MHz processor.
<4>Console: colour dummy device 80x25
<4>Calibrating delay loop... 1789.95 BogoMIPS
<6>Memory: 514272k/524208k available (1732k kernel code, 9548k reserved,
606k data, 176k init, 0k highmem)
<6>Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
<6>Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
<6>Mount cache hash table entries: 512 (order: 0, 4096 bytes)
<4>Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
<4>Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
<6>CPU: L2 Cache: 256K (64 bytes/line)
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<7>CPU:     After generic, caps: 0183f9ff c1c7f9ff 00000000 00000000
<7>CPU:             Common caps: 0183f9ff c1c7f9ff 00000000 00000000
<4>CPU: AMD Athlon(tm) Processor stepping 02
<6>Enabling fast FPU save and restore... done.
<6>Checking 'hlt' instruction... OK.
<4>POSIX conformance testing by UNIFIX
<4>mtrr: v1.40 (20010327) Richard Gooch (rgooch at atnf.csiro.au)
<4>mtrr: detected mtrr type: Intel
<6>ACPI: Subsystem revision 20030619
<6>PCI: PCI BIOS revision 2.10 entry at 0xf1180, last bus=1
<6>PCI: Using configuration type 1
<6>Looking for DSDT in initrd ... not found!
<6>ACPI: Interpreter enabled
<6>ACPI: Using PIC for interrupt routing
<6>ACPI: System [ACPI] (supports S0 S1 S4 S5)
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
<6>ACPI: PCI Root Bridge [PCI0] (00:00)
<4>PCI: Probing PCI hardware (bus 00)
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<6>PCI: Probing PCI hardware
<4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
<7>00:00:0c[A] -> IRQ 11 Mode 1 Trigger 1
<4>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
<7>00:00:0c[B] -> IRQ 10 Mode 1 Trigger 1
<4>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
<7>00:00:0c[C] -> IRQ 5 Mode 1 Trigger 1
<4>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
<7>00:00:0c[D] -> IRQ 9 Mode 1 Trigger 1
<7>PIC: IRQ (10) already programmed
<7>PIC: IRQ (5) already programmed
<7>PIC: IRQ (9) already programmed
<7>PIC: IRQ (11) already programmed
<7>PIC: IRQ (5) already programmed
<7>PIC: IRQ (9) already programmed
<7>PIC: IRQ (11) already programmed
<7>PIC: IRQ (10) already programmed
<7>PIC: IRQ (9) already programmed
<7>PIC: IRQ (11) already programmed
<7>PIC: IRQ (10) already programmed
<7>PIC: IRQ (5) already programmed
<7>PIC: IRQ (9) already programmed
<7>PIC: IRQ (11) already programmed
<7>PIC: IRQ (10) already programmed
<7>PIC: IRQ (5) already programmed
<7>PIC: IRQ (11) already programmed
<7>PIC: IRQ (10) already programmed
<7>PIC: IRQ (5) already programmed
<7>PIC: IRQ (9) already programmed
<7>PIC: IRQ (10) already programmed
<7>PIC: IRQ (5) already programmed
<7>PIC: IRQ (9) already programmed
<7>PIC: IRQ (11) already programmed
<7>PIC: IRQ (11) already programmed
<7>PIC: IRQ (10) already programmed
<7>PIC: IRQ (5) already programmed
<7>PIC: IRQ (9) already programmed
<7>PIC: IRQ (11) already programmed
<7>PIC: IRQ (10) already programmed
<7>PIC: IRQ (5) already programmed
<7>PIC: IRQ (9) already programmed
<6>PCI: Using ACPI for IRQ routing
<6>PCI: if you experience problems, try using option 'pci=noacpi' or even
'acpi=off'
<6>PCI: Disabling Via external APIC routing
<6>Linux NET4.0 for Linux 2.4
<6>Based upon Swansea University Computer Society NET3.039
<4>Initializing RT netlink socket
<6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
<5>apm: overridden by ACPI.
<4>Starting kswapd
<4>bigpage subsystem: allocated 0 bigpages (=0MB).
<4>kinoded started
<5>VFS: Disk quotas vdquot_6.5.1
<5>aio_setup: num_physpages = 32763
<5>aio_setup: sizeof(struct page) = 48
<6>vesafb: framebuffer at 0xe0000000, mapped to 0xe081a000, size 32768k
<6>vesafb: mode is 1280x1024x16, linelength=2560, pages=11
<6>vesafb: protected mode interface info at c000:4637
<6>vesafb: scrolling: redraw
<6>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
<6>bootsplash 3.0.9-2003/09/08: looking for picture... no good signature
found.
<4>Console: switching to colour frame buffer device 160x64
<6>fb0: VESA VGA frame buffer device
<4>pty: 256 Unix98 ptys configured
<6>Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI enabled
<6>ttyS00 at 0x03f8 (irq = 4) is a 16550A
<6>ttyS01 at 0x02f8 (irq = 3) is a 16550A
<6>Real Time Clock Driver v1.10e
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
<6>loop: loaded (max 16 devices)
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
<6>VP_IDE: IDE controller at PCI slot 00:04.1
<6>VP_IDE: chipset revision 16
<6>VP_IDE: not 100%% native mode: will probe irqs later
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
<6>VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci00:04.1
<6>    ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:pio
<6>    ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:DMA, hdd:pio
<6>PDC20265: IDE controller at PCI slot 00:11.0
<6>PDC20265: chipset revision 2
<6>PDC20265: not 100%% native mode: will probe irqs later
<6>PDC20265: (U)DMA Burst Bit DISABLED Primary PCI Mode Secondary PCI Mode.
<6>PDC20265: FORCING BURST BIT 0x00->0x01 ACTIVE
<6>    ide2: BM-DMA at 0x6000-0x6007, BIOS settings: hde:pio, hdf:pio
<6>    ide3: BM-DMA at 0x6008-0x600f, BIOS settings: hdg:pio, hdh:pio
<4>hda: Maxtor 33073H3, ATA DISK drive
<4>blk: queue c03eb3c0, I/O limit 4095Mb (mask 0xffffffff)
<4>hdc: LG CD-ROM CRD-8521B, ATAPI CD/DVD-ROM drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<4>ide1 at 0x170-0x177,0x376 on irq 15
<4>hda: attached ide-disk driver.
<4>hda: host protected area => 1
<6>hda: 60032448 sectors (30737 MB) w/2048KiB Cache, CHS=3736/255/63,
UDMA(66)
<6>ide-floppy driver 0.99.newide
<6>Partition check:
<6> hda: hda1 hda2 < hda5 hda6 hda7 > hda3 hda4
<6>ide-floppy driver 0.99.newide
<6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP, IGMP
<6>IP: routing cache hash table of 4096 buckets, 32Kbytes
<6>TCP: Hash tables configured (established 32768 bind 65536)
<6>Linux IP multicast router 0.06 plus PIM-SM
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<6>cryptoapi: loaded
<5>RAMDISK: Compressed image found at block 0
<6>Freeing initrd memory: 245k freed
<4>VFS: Mounted root (ext2 filesystem).
<4>reiserfs: found format "3.6" with standard journal
<4>reiserfs: enabling write barrier flush mode
<4>reiserfs: using ordered data mode
<4>reiserfs: checking transaction log (device ide0(3,7)) ...
<4>for (ide0(3,7))
<4>Using r5 hash to sort names
<4>VFS: Mounted root (reiserfs filesystem) readonly.
<5>Trying to move old root to /initrd ... failed
<5>Unmounting old root
<5>Trying to free ramdisk memory ... okay
<6>Freeing unused kernel memory: 176k freed
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<4>reiserfs: enabling write barrier flush mode
<4>reiserfs: enabling write barrier flush mode
<4>reiserfs: enabling write barrier flush mode
<4>reiserfs: enabling write barrier flush mode
<4>reiserfs: found format "3.6" with standard journal
<4>reiserfs: enabling write barrier flush mode
<4>reiserfs: using ordered data mode
<4>reiserfs: checking transaction log (device ide0(3,6)) ...
<4>for (ide0(3,6))
<4>Using r5 hash to sort names
<6>Adding Swap: 1052216k swap-space (priority 42)
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.

Boot logging started on /dev/tty1(/dev/console) at Mon Apr 18 16:25:20 2005

<notice>run boot scripts (setserial boot.proc)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.21-300-athlon-TEST/modules.dep (No such file or directory)

Configuring serial ports...
ttyS0 at 0x03f8 (irq = 4) is a 16550A
ttyS1 at 0x02f8 (irq = 3) is a 16550A
Configured serial ports
done<notice>exit status of (setserial boot.proc) is (0 0)
<notice>run boot scripts (boot.md boot.device-mapper)
Run file system check on root for device mapper setup
fsck 1.34 (25-Jul-2003)
Reiserfs super block in block 16 on 0x307 of format 3.6 with standard
journal
Blocks (total/free): 2333433/1458280 by 4096 bytes
Filesystem is clean
Filesystem seems mounted read-only. Skipping journal replay.
Checking internal tree..finished
doneRemounting root file system (/) read/write...
Activating device mapper...
modprobe: Can't open dependencies file
/lib/modules/2.4.21-300-athlon-TEST/modules.dep (No such file or directory)
device-mapper kernel module not loaded: can't create /dev/mapper/control.
Remounting root file system (/) read-only again...
done
<notice>exit status of (boot.md boot.device-mapper) is (0 0)
<notice>run boot scripts (boot.lvm)
<notice>exit status of (boot.lvm) is (0)
<notice>run boot scripts (boot.localfs)
Checking file systems...
fsck 1.34 (25-Jul-2003)
Reiserfs super block in block 16 on 0x307 of format 3.6 with standard
journal
Blocks (total/free): 2333433/1458280 by 4096 bytes
Filesystem is clean
Filesystem seems mounted read-only. Skipping journal replay.
Checking internal tree..finished
Reiserfs super block in block 16 on 0x306 of format 3.6 with standard
journal
Blocks (total/free): 26097/16314 by 4096 bytes
Filesystem is clean
Replaying journal..
0 transactions replayed
Checking internal tree..finished
doneMounting local file systems...
proc on /proc type proc (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/hda6 on /boot type reiserfs (rw)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.21-300-athlon-TEST/modules.dep (No such file or directory)

mount: fs type ntfs not supported by kernel
failed<notice>exit status of (boot.localfs) is (0)
<notice>run boot scripts (boot.crypto)
<notice>exit status of (boot.crypto) is (0)
<notice>run boot scripts (boot.swap boot.scpm boot.restore_permissions
boot.loadmodules)
Loading required kernel modules
doneActivating remaining swap-devices in /etc/fstab...
doneMounting shared memory FS on /dev/shmdone
Restore device permissionsdone
<notice>exit status of (boot.swap boot.scpm boot.restore_permissions
boot.loadmodules) is (0 0 0 0)
<notice>run boot scripts (boot.idedma boot.clock)
Setting up the CMOS clockdone
<notice>exit status of (boot.idedma boot.clock) is (0 0)
<notice>run boot scripts (boot.ldconfig)
Setting up timezone datadone
<notice>exit status of (boot.ldconfig) is (0)
<notice>run boot scripts (boot.sched boot.localnet boot.isapnp)
Setting scheduling timeslices unused
Setting up hostname 'duplo'done
Setting up loopback interface done
find: /tmp/ssh-*: No such file or directory
<notice>exit status of (boot.sched boot.localnet boot.isapnp) is (6 0 0)
<notice>run boot scripts (boot.klog boot.ipconfig)
Enabling syn flood protectiondone
Disabling IP forwardingdone
Creating /var/log/boot.msg
done<notice>killproc: kill(27,29)
System Boot Control: The system has been setup
Skipped features: boot.sched
System Boot Control: Running /etc/init.d/boot.local
<notice>exit status of (boot.klog boot.ipconfig) is (0 0)
done<notice>killproc: kill(27,3)

Boot logging started on /dev/tty1(/dev/console) at Mon Apr 18 14:25:30 2005

Master Resource Control: previous runlevel: N, switching to runlevel: 5
<notice>start services (random isdn)
Initializing random number generatordone
<notice>exit status of (random isdn) is (0 0)
<notice>start services (network)
Setting up network interfaces:
    lo        done
    eth0      failed
<notice>exit status of (network) is (0)
<notice>start services (syslog)
Starting syslog services<notice>startproc: execve (/sbin/syslogd) [
/sbin/syslogd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=19
INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=160
PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5
PWD=/ PREVLEVEL=N LINES=64 HOME=/ SHLVL=2 splash=silent sscripts=37
_=/sbin/startproc DAEMON=/sbin/syslogd ]
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -2 ], [
CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=19
INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=160
PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5
PWD=/ PREVLEVEL=N LINES=64 HOME=/ SHLVL=2 splash=silent sscripts=37
_=/sbin/startproc DAEMON=/sbin/klogd ]
done
<notice>exit status of (syslog) is (0)
<notice>start services (hotplug)
Starting hotplugging services [ ieee1394 net pci usb .. ]failed
<notice>exit status of (hotplug) is (1)
<notice>start services (resmgr)
Starting resource manager<notice>startproc: execve (/sbin/resmgrd) [
/sbin/resmgrd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=21
INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=160
PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5
PWD=/ PREVLEVEL=N LINES=64 HOME=/ SHLVL=2 splash=silent sscripts=37
_=/sbin/startproc DAEMON=/sbin/resmgrd ]
done
<notice>exit status of (resmgr) is (0)
<notice>start services (splash_early smbfs portmap)
<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [
CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=22
INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=160
PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5
PWD=/ PREVLEVEL=N LINES=64 HOME=/ SHLVL=2 splash=silent sscripts=37
_=/sbin/startproc DAEMON=/sbin/portmap ]
Starting RPC portmap daemondone
Mount SMB File System unused
<notice>exit status of (splash_early smbfs portmap) is (0 6 0)
<notice>start services (sshd fbset alsasound acpid)
<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o
PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console TERM=linux
SHELL=/bin/sh progress=25 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1
COLUMNS=160 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a
RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=64 HOME=/ SHLVL=2 splash=silent
sscripts=37 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
<notice>startproc: execve (/usr/sbin/acpid) [ /usr/sbin/acpid ], [
CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=25
INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=160
PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5
PWD=/ PREVLEVEL=N LINES=64 HOME=/ SHLVL=2 splash=silent sscripts=37
_=/sbin/startproc DAEMON=/usr/sbin/acpid ]
Starting sound drivermodprobe: Can't open dependencies file
/lib/modules/2.4.21-300-athlon-TEST/modules.dep (No such file or directory)
done
Starting SSH daemondone
Loading ACPI modules () done
Starting acpid done
<notice>exit status of (sshd fbset alsasound acpid) is (0 0 0 0)
<notice>start services (splash postfix kbd cups)
<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [
CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=29
INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=160
PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5
PWD=/ PREVLEVEL=N LINES=64 HOME=/ SHLVL=2 splash=silent sscripts=37
_=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
Starting cupsddone
Starting mail service (Postfix)done
Loading keymap qwertz/de-latin1-nodeadkeys.map.gz
doneLoading compose table latin1.adddone
Stop Unicode mode
doneLoading console font lat9w-16.psfu  -m trivial (B
done<notice>exit status of (splash postfix kbd cups) is (0 0 0 0)
<notice>start services (nscd hwscan cron)
Starting hardware scan on boot<notice>startproc: execve (/usr/sbin/nscd) [
/usr/sbin/nscd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh
progress=33 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=160
PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5
PWD=/ PREVLEVEL=N LINES=64 HOME=/ SHLVL=2 splash=silent sscripts=37
_=/sbin/startproc DAEMON=/usr/sbin/nscd ]
<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [
CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=33
INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=160
PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5
PWD=/ PREVLEVEL=N LINES=64 HOME=/ SHLVL=2 splash=silent sscripts=37
_=/sbin/startproc DAEMON=/usr/sbin/cron ]
Starting Name Service Cache Daemondone
Starting CRON daemondone
<notice>exit status of (nscd hwscan cron) is (0 0 0)
<notice>start services (xdm splash_late)
Starting service kdm<notice>startproc: execve (/opt/kde3/bin/kdm) [
/opt/kde3/bin/kdm ], [ LC_MONETARY= CONSOLE=/dev/console TERM=linux
SHELL=/bin/sh LC_NUMERIC= QTDIR=/usr/lib/qt3 LC_ALL=
http_proxy=http://172.16.10.1:3128 progress=36 INIT_VERSION=sysvinit-2.82
KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=160
PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin LC_MESSAGES= vga=0x31a
RUNLEVEL=5 LC_COLLATE= PWD=/ LANG=de_DE at euro PREVLEVEL=N LINES=64 HOME=/
SHLVL=2 XCURSOR_THEME=blueprint-cursor-theme no_proxy=localhost
WINDOWMANAGER=/usr/X11R6/bin/kde LC_CTYPE=de_DE at euro splash=silent
sscripts=37 LC_TIME= _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
done
<notice>exit status of (xdm splash_late) is (0 0)
Master Resource Control: runlevel 5 has been reached
Failed services in runlevel 5: hotplug
Skipped services in runlevel 5: smbfs
<notice>killproc: kill(473,3)

After this error, I rebuild my Kernel with the folowing command

make dep
make clean
make bzImage
make modules, here came the next error

ostdinc -iwithprefix include -DKBUILD_BASENAME=ipsec_tunnel  -c -o
ipsec_tunnel.o ipsec_tunnel.c
gcc -D__KERNEL__ -I/usr/src/linux-2.4.21-286/include  -Wall -Wstrict-prototy
pes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -fomit-frame-pointer
 -fno-unit-at-a-time -pipe -msoft-float -mpreferred-stack-boundary=2 -march=
athlon -DMODULE -DMODVERSIONS -include
/usr/src/linux-2.4.21-286/include/linux/modversions.h -DIPCOMP_PREFIX  -I../
../include -I/usr/src/linux-2.4.21-286/include  -I../../lib/zlib -DCONFIG_IP
SEC_ALG  -Wall -D__KERNEL__ -I/usr/src/linux-2.4.21-286/include -Wall -Wstri
ct-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -fomit-fra
me-pointer -fno-unit-at-a-time -pipe -msoft-float -mpreferred-stack-boundary
=2 -march=athlon -DMODULE -DMODVERSIONS -include
/usr/src/linux-2.4.21-286/include/linux/modversions.h -nostdinc -iwithprefix
include -DKBUILD_BASENAME=ipsec_xmit  -c -o ipsec_xmit.o ipsec_xmit.c
ipsec_xmit.c: In function `ipsec_xmit_encap_once':
ipsec_xmit.c:919: error: too many arguments to function
`ip_select_ident_Rd603b6c5'
make[2]: *** [ipsec_xmit.o] Error 1
make[2]: Leaving directory `/usr/src/linux-2.4.21-286/net/ipsec'
make[1]: *** [_modsubdir_ipsec] Error 2
make[1]: Leaving directory `/usr/src/linux-2.4.21-286/net'
make: *** [_mod_net] Error 2

Lennart