[Openswan Users] upgrade problem

graham at thepostoffice.com graham at thepostoffice.com
Sun Oct 10 21:25:21 CEST 2004

Hi Paul,

The reason (I think) why is not on left or right
Is that it is a road warrior with an ISP assigned IP address.  

Also if IPSEC0, IPSEC1, etc has gone how do you know that packets are
leaving in the right tunnel?  Many thanks.

Any Ideas?  



-----Original Message-----
From: Paul Wouters [mailto:paul at xelerance.com] 
Sent: Friday, October 08, 2004 6:58 PM
To: graham
Cc: users at openswan.org
Subject: Re: [Openswan Users] upgrade problem

On Fri, 8 Oct 2004, graham wrote:

> Just upgraded from RH9 + Freeswan 2.05 to FC2 + openswan-2.2.0-2
> Using kernel-2.6.8-1.521 and ipsec-tools-0.2.5-4 and guess what . its
> All gone wrong :-(


> I don't seem to be getting the IPSEC interfaces up at all ... ahhh

That's normal on 2.6 kernels.

> I've included a barf for the experts out there.

I see a connection definition with a left and a right, and a log saying:
Oct  7 16:51:44 ipsec pluto[26172]: packet from initial
Main Mode message received on but no connection has been
but is neither in left or right.

I wouldn't know how this would have worked before. I think you changed more
then just openswan and kernel.

> Many thanks in advance
> Graham

 	"Non cogitamus, ergo nihil sumus"

More information about the Users mailing list