[Openswan Users] IPSEC-STOPS-INTERNET

Robert W. Burgholzer rburgholzer at maptech-inc.com
Fri May 7 09:46:58 CEST 2004


Rohit,
First off, you may wish to look for the output of the "route" command, as 
it sounds as if all traffic to the internet may be getting routed through 
the ipsec interface, which would be a problem.

r.b.

At 02:59 AM 5/3/2004 -0700, persaie persaie wrote:
>Hello Group,
>
>I am a newbie,
>
>When i start ipsec on my machine i am unable to do net
>browsing ( internet connection stops).
>
>my ifconfig shows :
>
>eth0      Link encap:Ethernet  HWaddr
>00:07:95:D2:0F:3F
>           inet addr:192.168.3.8  Bcast:192.168.3.255
>Mask:255.255.255.0
>           UP BROADCAST RUNNING MULTICAST  MTU:1500
>Metric:1
>           RX packets:151651 errors:0 dropped:25
>overruns:0 frame:0
>           TX packets:28603 errors:0 dropped:0
>overruns:0 carrier:0
>           collisions:0 txqueuelen:1000
>           RX bytes:65754223 (62.7 Mb)  TX
>bytes:2573080 (2.4 Mb)
>           Interrupt:5 Base address:0xdc00
>
>ipsec0    Link encap:Ethernet  HWaddr
>00:07:95:D2:0F:3F
>           inet addr:192.168.3.8  Mask:255.255.255.0
>           UP RUNNING NOARP  MTU:16260  Metric:1
>           RX packets:0 errors:0 dropped:0 overruns:0
>frame:0
>           TX packets:0 errors:0 dropped:0 overruns:0
>carrier:0
>           collisions:0 txqueuelen:10
>           RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
>
>
>why this ipsec0 have come ...
>
>pls help,
>
>Thanks in advance,
>regards,
>rohit
>
>
>
>
>
>__________________________________
>Do you Yahoo!?
>Win a $20,000 Career Makeover at Yahoo! HotJobs
>http://hotjobs.sweepstakes.yahoo.com/careermakeover
>_______________________________________________
>Users mailing list
>Users at lists.openswan.org
>http://lists.openswan.org/mailman/listinfo/users

Robert Burgholzer
Environmental Engineer
MapTech Inc.
http://www.maptech-inc.com/ 



More information about the Users mailing list