[Openswan Users] server fails to add route to roadwarrior

[Nate Carlson]

On Fri, 26 Mar 2004, Robert W. Burgholzer wrote:
> Server Routing Table:
> Kernel IP routing table
> Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
> 192.168.1.0     *               255.255.255.0   U     0      0        0 eth0
> 12.5.16.0       *               255.255.252.0   U     0      0        0 eth1
> 12.5.16.0       *               255.255.252.0   U     0      0        0 ipsec0
> 127.0.0.0       *               255.0.0.0       U     0      0        0 lo
> default         *               0.0.0.0         U     0      0        0 eth1

I believe this is your problem - Openswan expects there to be a default
gateway set, not just a default interfaces. Is there any way you can find
out what the proper next hop is? 12.5.16.1 or .254 would be my guesses.

------------------------------------------------------------------------
| nate carlson | natecars at natecarlson.com | http://www.natecarlson.com |
|       depriving some poor village of its idiot since 1981            |
------------------------------------------------------------------------