[Openswan Users] Does pluto miss something?

[Philippe Mazellier]

Hi all,

Does annybody have send an answer to this post because i have the same 
problem with Openswan 2.1.3 on kernel 2.4

When ipsec start, i can see :

Jun 24 11:52:21 rgm6 ipsec__plutorun: Starting Pluto subsystem...
Jun 24 11:52:21 rgm6 pluto[3661]: Starting Pluto (Openswan Version 2.1.3 
X.509-1.4.8-1 PLUTO_USES_KEYRR)
Jun 24 11:52:21 rgm6 pluto[3661]:   including NAT-Traversal patch (Version 
0.6c) [disabled]
Jun 24 11:52:21 rgm6 pluto[3661]: Using Linux 2.6 IPsec interface code
Jun 24 11:52:21 rgm6 pluto[3661]: Changing to directory '/etc/ipsec.d/cacerts'
Jun 24 11:52:21 rgm6 pluto[3661]:   Warning: empty directory
Jun 24 11:52:21 rgm6 pluto[3661]: Changing to directory '/etc/ipsec.d/crls'
Jun 24 11:52:21 rgm6 pluto[3661]:   Warning: empty directory
Jun 24 11:52:22 rgm6 pluto[3661]: added connection description "Client"
Jun 24 11:52:22 rgm6 pluto[3661]: listening for IKE messages
Jun 24 11:52:22 rgm6 pluto[3661]: adding interface eth1/eth1 1.1.1.2
Jun 24 11:52:22 rgm6 pluto[3661]: adding interface eth0/eth0 192.168.128.6
Jun 24 11:52:22 rgm6 pluto[3661]: adding interface lo/lo 127.0.0.1
Jun 24 11:52:22 rgm6 pluto[3661]: loading secrets from "/etc/ipsec.secrets"
Jun 24 11:52:22 rgm6 pluto[3661]: "Client" #1: initiating Main Mode
Jun 24 11:52:23 rgm6 pluto[3661]: "Client" #1: ignoring Vendor ID payload 
[625027749d5ab97f...]
Jun 24 11:52:23 rgm6 pluto[3661]: "Client" #1: transition from state 
STATE_MAIN_I1 to state STATE_MAIN_I2
Jun 24 11:52:24 rgm6 pluto[3661]: "Client" #1: transition from state 
STATE_MAIN_I2 to state STATE_MAIN_I3
Jun 24 11:52:24 rgm6 pluto[3661]: "Client" #1: ignoring informational 
payload, type IPSEC_INITIAL_CONTACT
Jun 24 11:52:24 rgm6 pluto[3661]: "Client" #1: Peer ID is ID_IPV4_ADDR: 
'1.1.1.1'
Jun 24 11:52:24 rgm6 pluto[3661]: "Client" #1: transition from state 
STATE_MAIN_I3 to state STATE_MAIN_I4
Jun 24 11:52:24 rgm6 pluto[3661]: "Client" #1: ISAKMP SA established
Jun 24 11:52:24 rgm6 pluto[3661]: "Client" #2: initiating Quick Mode 
PSK+ENCRYPT+TUNNEL+PFS+UP {using isakmp#1}
Jun 24 11:52:26 rgm6 pluto[3661]: "Client" #2: ERROR: netlink response for 
Add SA esp.c45f09a at 1.1.1.2 included errno 2: No such file  or directory

I'm trying to connect a debian box with a Zyxel Zywall 2.

Thanks for your help.
Philippe