[Openswan Users] Routing from a gateway to the remote network

[Greg Dickinson]

I've done some fairly extensive Googling, and tried several different
configs to get this running.  Basically, I have the following config:

FamCourt net (10.199.0.0/16)
|
FamCourt Gateway (10.199.1.1) => (172.25.1.2)
|
<some sort of NAT provided by the county>
|
|
INTERNET
|
|
BOE Gateway (25.50.75.100 [not real]) => 10.10.1.50
|
BOE Net (10.10.0.0/16)

I can route packets from any host on the 10.199.0.0/16 network to any
host on the 10.10.0.0/16 network, and vice versa, by using a modified
"road warrior" config.  However, I have need for packets to go from the
FamCourt gateway to the 10.10.0.0/16 network, and I can't seem to get
anything to go that direction.  

Connection info:
conn famcourtgate-boenet
    left=172.25.1.2             # Picks up our dynamic IP
    leftnexthop=172.25.1.1
    leftid=@famcourt.bps           # Local information
    leftrsasigkey=0sAQOqH....
    right=207.157.9.161            # Remote information
    rightid=@monitor.bps           #
    rightsubnet=10.10.0.0/16
    rightrsasigkey=0sAQPG....
    auto=add                       # authorizes but doesn't start this

This is from another posting on[I believe] this mailing list.  I know I
have missed something here, but I can't figure out what.  Any ideas?
:-)

TIA,

--Greg