[Openswan Users] Perplexing log output

[Ted Kaczmarek]

On Fri, 2004-07-16 at 20:55 -0400, Ted Kaczmarek wrote:
> Jul 16 20:37:24 firewall ipsec_setup: Using /lib/modules/2.4.22-
> 1.2197.nptl/kernel/net/openswan/ipsec.o
> Jul 16 20:37:24 firewall kernel: klips_info:ipsec_init: KLIPS startup,
> Openswan IPsec version: 2.1.4
> Jul 16 20:37:25 firewall ipsec_setup: KLIPS debug `none'
> Jul 16 20:37:25 firewall kernel:
> Jul 16 20:37:25 firewall ipsec_setup: KLIPS ipsec0 on eth0
> 67.80.119.98/255.255.240.0 broadcast 255.255.255.255
> Jul 16 20:37:25 firewall ipsec_setup: ...Openswan IPsec started
> Jul 16 20:37:26 firewall ipsec__plutorun: 003 IP interfaces eth0 and
> eth0 share address 67.80.149.98!
> Jul 16 20:37:26 firewall ipsec__plutorun: 003 no public interfaces found
> 
> 
> Doing some interoperability testing, this is from a FC1 box to a pix
> 515. Followed the wiki  http://wiki.openswan.org/index.php/CiscoPIX.
> 
> I do use mac changer on this box but I am lost as to how that is
> affecting this. 
> 
> IP interfaces eth0 and eth0 share address 67.80.149.98!
> 
> Using Dag's rpms.
> openswan-utils-2.1.4-1.dag
> kernel-module-openswan-2.4.22-1.2197.nptl-2.1.4-1.1.fc1.dag
> 
> Any idea on what is causing this log entry?
> 
> 
> Thanks,
> Ted
> 

Whoops, responding to my own post :-)
This was due to the fact that I had my eth0 specified in my zebra
daemon.


Ted