[Openswan Users] 2 DSL Connections

[Sebastian Haas]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hello List,

we have 2 DSL connections (both have a dynamic IP):
PPP0 (VPN Connection)
PPP1 (Internet Connection, default gateway)

We use a Dynamic DNS service. I've configured OpenSWAN to use PPP0 for
VPN. But the tunnel couldn't be established, it hangs in MAIN. It looks
like the other end of the tunnel (is also an OpenSWAN) is not responding.

If i set the default gateway to PPP0 everything works fine, but if PPP1
is the default gateway it didn't work. But in the logs there is
something like "sending XYbytes through PPP0". If i setup a route where
i use the IP of the peer as destination and interface PPP0 it works, but
thats not are solution.

Our network setup looks like:

NETWORK ONE (OpenSWAN Linux2.4)      Network TWO (OpenSWAN Linux2.6)
~             PPP0 <--->              <---> PPP0
~                          Internet
~             PPP1 <--->

Any ideas?

Thanks in advance,
Sebastian Haas
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.5 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org

iD8DBQFByoAUpqRB8PJG7XwRAgpaAJ444Ci8WKZZ9/sdcOwxakkBLrsQMgCfXdPB
0l8+S3VbIhZgn1eQt2OxUl0=
=ignn
-----END PGP SIGNATURE-----