[Openswan Users] Default gateway for roadwarrior

[dotnoc]

figured it out.. you have to set in the advanced tcp/ip options the "use remote 
gateway" option.

thanks for the help :-)


Quoting Brad Chang <openswan at dotnoc.com>:

> Hi I have a roadwarrior config (l2tpd/ppp/x.509 certs) which connects and 
> works.  The problem I have is after the roadwarrior connects to the vpn then
> 
> all traffic wants to go through the vpn even web traffic.  is there somwhere
> to 
> set an option that says only if you are going to x network then go over the
> vpn?
> I know with ipsec.exe you can.. I think if I can get the gateway set for the
> 
> ppp adaptor set correcly (172.16.32.254) then it will work.  
> 
> PPP adapter Virtual Private Connection:
> 
>         Connection-specific DNS Suffix  . :
>         IP Address. . . . . . . . . . . . : 172.16.32.248
>         Subnet Mask . . . . . . . . . . . : 255.255.255.255
>         Default Gateway . . . . . . . . . : 172.16.32.248
> 
> 
> thanks alot for the help
> 
> 
> 
> Thanks and best regards,
> -Brad Chang
> -http://www.dotnoc.com
> 
> 
> -------------------------------------------------------------------
> hosting,web design and managed services @ http://www.dotnoc.com
> 
> _______________________________________________
> Users mailing list
> Users at lists.openswan.org
> http://lists.openswan.org/mailman/listinfo/users
>