[Openswan dev] Error building klips-ipv6 (missing include?)

[Harald Jenny]

On Tue, Oct 12, 2010 at 07:45:11AM +1000, David McCullough wrote:
> 
> Jivin Harald Jenny lays it down ...
> > On Mon, Oct 11, 2010 at 12:28:34PM -0400, Paul Wouters wrote:
> > > On Mon, 11 Oct 2010, Ruben Laban wrote:
> > > 
> > > > I also noticed the mtu is quite huge. I wonder if that could interfere with
> > > > pmtud somehow?
> > > 
> > > MTU's are huge so that fragmentation never happens on the virtual devices,
> > > only on the real physical devices.
> > > 
> > > > More important (to me at least) is that I still need to do:
> > > >
> > > > # ip addr add 2a02:bd0:abcd:3::20/64 dev ipsec0
> > > > # ipsec whack --listen
> > > >
> > > > before pluto starts listening on the IPv6 address.
> > > 
> > > Is 2a02:bd0:abcd:3::20/64 an address that's configured as a real IP address
> > > on a real physical interface? If so, it should always show up in the listen
> > > list. Can you give me a plutodebug=all of "ipsec setup start"?
> > 
> > Shouldn't this be done by tncfg? Maybe there lies the source of the problem?
> 
> Yes,  but if "ipsec setup start" runs before the interface has an IPv6
> address,  then it won't be picked up.

Well, sounds like a TODO?

> 
> Cheers,
> Davidm

Kind regards
Harald

> 
> -- 
> David McCullough,      david_mccullough at mcafee.com,  Ph:+61 734352815
> McAfee - SnapGear      http://www.mcafee.com         http://www.uCdot.org