[Openswan dev] KLIPS and 802.1q
paul at xelerance.com
Tue May 29 22:19:09 EDT 2007
On Tue, 29 May 2007, Mikhail Pustovit wrote:
> I have the same problem on 2.6.18 kernel and Openswan 2.4.7.
> When using KLIPS, and ipsec0 is pointed to VLAN interface
> (interfaces="ipsec0=vlan0010"), tunnel establishes connection,
> but can't transmit any data. TX errors counter on ipsec0 increases
> with each packet transmitted.
It should work fine. Can you enable klipsdebug briefly to see what is
ipsec klipsdebug --all
[send a few packets]
ipsec klipsdebug --none
Be carefull, this will generate a LOT of logs per packet.
It should give some information as to why the packets are being dropped.
More information about the Dev