[Openswan dev] ipsec__plutorun: 104 "z2" #1: STATE_MAIN_I1: initiate ...could not start conn "z2"

[Linux User]

Hello swan experts,

I've setup openswan to tunel between 2 networks. My config comes below. The
problem is that tunel is working (i have connectivity between networks) but,
when i start ipsec, a strange message appear in my syslog (on booths sides):

Jun 13 17:52:59 nx ipsec__plutorun: 104 "z2" #1: STATE_MAIN_I1: initiate
Jun 13 17:52:59 nx ipsec__plutorun: ...could not start conn "z2"
And tunel comes up!!!! And yes, on the oposite side, ipsec is already
running!!!!

Is a bug or a feature? If not a bug, how can be convinced openswan to
display more info and/or turn off this stupid message? Trying to add
plutodebug=all in ipsec.conf doesn't add more verbosity to openswan!

[root at nx ~]# cat /etc/issue
CentOS release 4.5 (Final)
Kernel \r on an \m
[root at nx ~]#

[root at nx ~]# uname -r
2.6.9-55.EL
[root at nx ~]#

[root at nx ~]# rpm -q openswan
openswan-2.4.8-1
[root at nx ~]#

Openswan has been compiled by me using rpmbuild -ta
openswan-2.4.8.tar.gzfrom openswan website!

[root at nx ~]# service ipsec start

[root at nx ~]# tail -f /var/log/messages
Jun 13 17:52:59 nx ipsec_setup: ...Openswan IPsec started
Jun 13 17:52:59 nx ipsec_setup: Starting Openswan IPsec U2.4.8 /K2.6.9-
55.EL...
Jun 13 17:52:59 nx ipsec__plutorun: 104 "z2" #1: STATE_MAIN_I1: initiate
Jun 13 17:52:59 nx ipsec__plutorun: ...could not start conn "z2"

[root at nx ~]# cat /etc/ipsec.conf
version 2.0
conn z2
    authby=secret
    left=1.2.3.4
    leftsubnet= 192.168.13.0/24
    leftnexthop=1.2.3.111
    right=5.6.7.8
    rightsubnet= 10.0.0.0/24
    rightnexthop=5.6.7.222
    keyexchange=ike
    auth=esp
    esp=3des-md5-96
    keylife=8h
    pfs=no
    auto=start
include /etc/ipsec.d/examples/no_oe.conf
[root at nx ~]#

Any hints,
Alx
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openswan.org/pipermail/dev/attachments/20070614/778d003c/attachment.html