<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">
<META NAME="Generator" CONTENT="MS Exchange Server version 6.5.7651.59">
<TITLE>RE: [Openswan Users] Setting leftsubnet stops xl2tpd from working</TITLE>
</HEAD>
<BODY>
<!-- Converted from text/plain format -->
<P><FONT SIZE=2>Is this with leftsubnet/rightsubnet removed?<BR>
<BR>
Regards,<BR>
Randy<BR>
<BR>
<BR>
-----Original Message-----<BR>
From: porges@porg.es on behalf of George Pollard<BR>
Sent: Mon 8/9/2010 5:37 PM<BR>
To: Randy Wyatt<BR>
Cc: Willie Gillespie; users@openswan.org<BR>
Subject: Re: [Openswan Users] Setting leftsubnet stops xl2tpd from working<BR>
<BR>
On 10 August 2010 12:07, Randy Wyatt <rwyatt@nvtl.com> wrote:<BR>
> Have you turned on debugging for xl2tpd ?<BR>
<BR>
Here is the output for xl2tpd with all the 'debug x = yes' options<BR>
enabled (I've removed the raw packet dumps):<BR>
<BR>
setsockopt recvref[22]: Protocol not available<BR>
This binary does not support kernel L2TP.<BR>
xl2tpd version xl2tpd-1.2.5 started on MY_VPN PID:9362<BR>
Written by Mark Spencer, Copyright (C) 1998, Adtran, Inc.<BR>
Forked by Scott Balmos and David Stipp, (C) 2001<BR>
Inherited by Jeff McAdams, (C) 2002<BR>
Forked again by Xelerance (www.xelerance.com) (C) 2006<BR>
Listening on IP address 0.0.0.0, port 1701<BR>
network_thread: recv packet from MY_CLIENT_IP, size = 106, tunnel =<BR>
0, call = 0 ref=0 refhim=0<BR>
<BR>
get_call: allocating new tunnel for host MY_CLIENT_IP, port 1701.<BR>
handle_avps: handling avp's for tunnel 46540, call 0<BR>
message_type_avp: message type 1 (Start-Control-Connection-Request)<BR>
protocol_version_avp: peer is using version 1, revision 0.<BR>
framing_caps_avp: supported peer frames: sync<BR>
bearer_caps_avp: supported peer bearers:<BR>
firmware_rev_avp: peer reports firmware version 1537 (0x0601)<BR>
hostname_avp: peer reports hostname 'MY_CLIENT'<BR>
vendor_avp: peer reports vendor 'Microsoft'<BR>
assigned_tunnel_avp: using peer's tunnel 3<BR>
receive_window_size_avp: peer wants RWS of 8. Will use flow control.<BR>
control_finish: message type is Start-Control-Connection-Request(1).<BR>
Tunnel is 3, call is 0.<BR>
<BR>
control_finish: sending SCCRP<BR>
network_thread: recv packet from MY_CLIENT_IP, size = 106, tunnel =<BR>
0, call = 0 ref=0 refhim=0<BR>
<BR>
get_call: allocating new tunnel for host MY_CLIENT_IP, port 1701.<BR>
handle_avps: handling avp's for tunnel 8206, call 0<BR>
message_type_avp: message type 1 (Start-Control-Connection-Request)<BR>
protocol_version_avp: peer is using version 1, revision 0.<BR>
framing_caps_avp: supported peer frames: sync<BR>
bearer_caps_avp: supported peer bearers:<BR>
firmware_rev_avp: peer reports firmware version 1537 (0x0601)<BR>
hostname_avp: peer reports hostname 'MY_CLIENT'<BR>
vendor_avp: peer reports vendor 'Microsoft'<BR>
assigned_tunnel_avp: using peer's tunnel 3<BR>
receive_window_size_avp: peer wants RWS of 8. Will use flow control.<BR>
control_finish: message type is Start-Control-Connection-Request(1).<BR>
Tunnel is 3, call is 0.<BR>
control_finish: Peer requested tunnel 3 twice, ignoring second one.<BR>
build_fdset: closing down tunnel 8206<BR>
network_thread: recv packet from MY_CLIENT_IP, size = 106, tunnel =<BR>
0, call = 0 ref=0 refhim=0<BR>
<BR>
get_call: allocating new tunnel for host MY_CLIENT_IP, port 1701.<BR>
handle_avps: handling avp's for tunnel 18888, call 19870<BR>
message_type_avp: message type 1 (Start-Control-Connection-Request)<BR>
protocol_version_avp: peer is using version 1, revision 0.<BR>
framing_caps_avp: supported peer frames: sync<BR>
bearer_caps_avp: supported peer bearers:<BR>
firmware_rev_avp: peer reports firmware version 1537 (0x0601)<BR>
hostname_avp: peer reports hostname 'MY_CLIENT'<BR>
vendor_avp: peer reports vendor 'Microsoft'<BR>
assigned_tunnel_avp: using peer's tunnel 3<BR>
receive_window_size_avp: peer wants RWS of 8. Will use flow control.<BR>
control_finish: message type is Start-Control-Connection-Request(1).<BR>
Tunnel is 3, call is 0.<BR>
control_finish: Peer requested tunnel 3 twice, ignoring second one.<BR>
build_fdset: closing down tunnel 18888<BR>
network_thread: select timeout<BR>
network_thread: select timeout<BR>
network_thread: select timeout<BR>
network_thread: select timeout<BR>
network_thread: recv packet from MY_CLIENT_IP, size = 106, tunnel =<BR>
0, call = 0 ref=0 refhim=0<BR>
<BR>
get_call: allocating new tunnel for host MY_CLIENT_IP, port 1701.<BR>
handle_avps: handling avp's for tunnel 28807, call 3715<BR>
message_type_avp: message type 1 (Start-Control-Connection-Request)<BR>
protocol_version_avp: peer is using version 1, revision 0.<BR>
framing_caps_avp: supported peer frames: sync<BR>
bearer_caps_avp: supported peer bearers:<BR>
firmware_rev_avp: peer reports firmware version 1537 (0x0601)<BR>
hostname_avp: peer reports hostname 'MY_CLIENT'<BR>
vendor_avp: peer reports vendor 'Microsoft'<BR>
assigned_tunnel_avp: using peer's tunnel 3<BR>
receive_window_size_avp: peer wants RWS of 8. Will use flow control.<BR>
control_finish: message type is Start-Control-Connection-Request(1).<BR>
Tunnel is 3, call is 0.<BR>
control_finish: Peer requested tunnel 3 twice, ignoring second one.<BR>
build_fdset: closing down tunnel 28807<BR>
network_thread: select timeout<BR>
Maximum retries exceeded for tunnel 46540. Closing.<BR>
network_thread: recv packet from MY_CLIENT_IP, size = 106, tunnel =<BR>
0, call = 0 ref=0 refhim=0<BR>
<BR>
get_call: allocating new tunnel for host MY_CLIENT_IP, port 1701.<BR>
handle_avps: handling avp's for tunnel 18015, call 0<BR>
message_type_avp: message type 1 (Start-Control-Connection-Request)<BR>
protocol_version_avp: peer is using version 1, revision 0.<BR>
framing_caps_avp: supported peer frames: sync<BR>
bearer_caps_avp: supported peer bearers:<BR>
firmware_rev_avp: peer reports firmware version 1537 (0x0601)<BR>
hostname_avp: peer reports hostname 'MY_CLIENT'<BR>
vendor_avp: peer reports vendor 'Microsoft'<BR>
assigned_tunnel_avp: using peer's tunnel 3<BR>
receive_window_size_avp: peer wants RWS of 8. Will use flow control.<BR>
control_finish: message type is Start-Control-Connection-Request(1).<BR>
Tunnel is 3, call is 0.<BR>
control_finish: Peer requested tunnel 3 twice, ignoring second one.<BR>
build_fdset: closing down tunnel 18015<BR>
build_fdset: closing down tunnel 46540<BR>
<BR>
Connection 3 closed to MY_CLIENT_IP, port 1701 (Timeout)<BR>
network_thread: select timeout<BR>
network_thread: select timeout<BR>
network_thread: select timeout<BR>
network_thread: select timeout<BR>
network_thread: select timeout<BR>
Unable to deliver closing message for tunnel 46540. Destroying anyway.<BR>
<BR>
</FONT>
</P>
</BODY>
</HTML>